523814
49
Zoom out
Zoom in
Previous page
1/68
Next page
49
EN
(A) Installation of the header bracket (1)
NOTE
The header bracket (1) must be aligned with the mid-
point of the door.
Key
1 = Header bracket
2 = Screw (6 x 80 mm) with hexagon nut
3 = Hexagon screw (8 x 60 mm)
4 = Rail
1.
2.
3.
12
3
4
Mark out the position of the header bracket
(1) and drill the mounting holes (e.g. with a
10 mm masonry drill bit).
Screw the header bracket (1) tight with the
enclosed hexagon screws (8 x 60 mm).
Then fix the rail (4) with the enclosed
hexagon screw (6 x 80 mm) to the header
bracket (1).
(B) Installation of the fixing bracket (5) at the door operator head (7)
1.
2.
Push the fixing bracket (5) onto the rail (4), as
close to the door operator head (7) as possible.
Mark the mounting holes for the fixing
bracket (5).
In order to do so, lift the entire construction and push
it against the ceiling.
NOTE
Ensure that the rail (4) is aligned with the centre of
the door.
Drill the mounting holes (e.g. with a 10 mm
masonry drill bit).
Finally screw the fixing bracket (5) to the ga-
rage ceiling with the enclosed hexagon screws
(8 x 60 mm).
5
6
3.
7
4
Key
4 = Rail
5 = Fixing bracket
6 = Hexagon screw (8 x 60 mm)
7 = Door operator head
4.
49


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Superrollo TA50 - SR40050 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Superrollo TA50 - SR40050 in the language / languages: English, German as an attachment in your email.

The manual is 3,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Superrollo TA50 - SR40050

Superrollo TA50 - SR40050 User Manual - Dutch, French, Spanish - 104 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info