Manual Superrollo RM10MSF (page 17 of 68) (English, German, Polish, Portuguese, Spanish)

650844

Zoom out

Zoom in

1/68

Preface

These operating instructions describe the installation, the electrical connection

and the operation of the RM10MSF/RM10MMF/

RM20MMF/RM30MMF electronic tubular motors. Read through these operating

instructions carefully prior to installation and initial operation and, in particular,

follow the safety instructions!

These instructions help you to make

■ proper,

■ safe and

■ advantageous

use of the RM10MSF/RM10MMF/RM20MMF/RM30MMF electronic tubular

motors, briefly referred to as the motor.

These instructions describe the installation and use of the tubular motor with the

necessary superrollo accessories. The term device is used in these instructions

for the tubular motor in combination with the accessories.

These operating instructions are intended for the following persons:

■ Persons who install this device,

■ Persons who connect this device,

■ Persons who operate this device,

■ Persons who maintain this device or

■ Persons who dispose of this device.

Each of these persons must have read and understood the entire content of these

operating instructions.

All activities on and with this device may only be carried out to the extent that they

are described in these operating instructions.

The warranty expires in the event of damage caused by non-observance of these

instructions. superrollo accepts no liability for subsequent damage.

Availability

These operating instructions form part of the product. Always store these

operating instructions in the vicinity of the device. Pass the operating instructions

on if you sell the device or forward it an any other manner.

Structural features of these operating instructions

Defined structural features are assigned to the various elements within the

operating instructions. You can therefore easily determine the type of text which

this involves:

Normal text,

Cross references,

DIRECTIONS OF ROTATION OF THE ADJUSTER SCREWS,

■ Lists or

¾ Action steps.

Notices with this symbol contain information on economical use of the

device.

Basic safety instructions

Proper use

The device is used exclusively for raising and lowering smoothly running roller

shutters and awnings.

Avoiding electric shocks

■ Have connection to the mains and all work on the voltage supply carried out by

a qualified, trained specialist electrician only.

■ Only connect the device to a 230 V~50 Hz current connection which is fused in

the building.

■ Carry out all installation and connection work in voltage-free condition.

■ If cables or electrical facilities which are not required are present at the

installation location, remove these or decommission them.

■ Before installing the motor, remove all cables and electrical facilities which are

not required for operation or decommission them.

■ Route the motor cable internally in the empty tube, observing the local electrical

regulations, up to the junction box.

■ In the event of malfunctions, disconnect the device from the mains power

supply.

■ Before opening the roller shutter box, disconnect the device from the mains

power supply.

■ Prior to cleaning work on the roller shutter, disconnect the device from the

mains power supply.

■ Do not store the motor together with acid, alkaline substances or dirty or eroded

materials.

■ Make sure that the device does not become moist and is not located in a

vapourous environment during transportation, storage and use.

■ Do not use the motor for garage doors in public buildings.

■ Do not touch the mains power cable with moist hands.

■ Never unscrew the device's housing.

■ Never use a defective device. If your device is defective, contact the customer

service.

■ In the event of use in damp rooms, observe DIN VDE 0100, Parts 701 and 702.

Avoiding risk of injury

■ Make sure that the roller shutter box is closed when the device is in operation.

■ Make sure that no persons are located beneath the roller shutter when the roller

shutter is being lowered.

■ Make sure that children do not play with the remote control.

■ Make sure that no persons can be injured by the roller shutter slipping down

during installation work.

■ Lower the roller shutter completely prior to installation work or support the roller

shutter.

■ Only use the device with roller shutters whose weight is appropriate for the

tubular motor. Information on this can be found in the section entitled

Permissible roller shutter areas and weights from page 19.

■ Regularly check the device for imbalance, damage and worn cables and

springs.

■ Only use the device in flawless condition.

■ Do not start the motor too frequently, and do not overload it.

■ Only turn the adjustment knob or the drive bushing in operating mode.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Superrollo RM10MSF in the language / languages: English, German, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 4,05 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Superrollo RM10MSF Manual

Product: