38267
4
Zoom out
Zoom in
Previous page
1/7
Next page
Note: If the battery symbol blinks in one unit and you hear an alarm every 5 –10
seconds, this means the battery must be recharged to continue operation. T
he
parent unit also gives a signal to indicate a weak baby unit battery but the
sound is softer. The battery symbol then blinks only on the baby unit.
1. The baby unit and parent unit must be set to the same channel, A or B.
If the units do not display the same channel, the channel on one of the units
must be switched. Press the M key (menu) and the channel indicator will
blink. Switch channels using the
or
key, then press the M key again to
store your programming.
Note: Changed settings will be stored when the unit is turned off. If the unit
signals a weak battery, changes will not be stored.
2. T
he digital code must be the same for the baby unit and the parent unit,
1 – 15.
If not, switch codes on one of the units. This unit must then first be turned
off. Then press the M key, and while depressing it turn on the unit by press-
ing and releasing the On/Off button. The digital code number will then blink.
Then release the M key. Change the code using the
or
keys (1 to 15).
Then press the M key to store the code. If the M key is not pressed, the unit
will automatically return to the original coding after 10 seconds.
Note: Code 0 should only be used if extra long range is required, but it does
not offer as good protection against interference as digital codes 1-15.
3. T
hen test the set by whistling into the baby unit and check that it can be
heard in the parent unit.
If no sound can be heard, check whether the parent unit displays the speak-
er symbol (no symbol = speaker and red light diodes (B9) are switched off).
If the symbol is not displayed or you want to adjust the volume, this is done
by simply pressing the
key several times.
The red light diodes give you the option of visually monitoring the sound
level, regardless the volume setting, for example if you do not want to
disturb others or are in noisy surroundings.
4. Place the baby unit vertically close to the child, minimum 1- 1.5 m
.
The telescopic antenna must always be fully pulled out to ensure that the
parent unit is reached.
5. Place the par
ent unit vertically close to where you are.
Pull out the telescopic antenna if necessary.
6. Adjustable sensitivity on the baby unit's micr
ophone.
Press the S key (sensitivity) on the baby unit and the ear symbol will blink.
Use the
or
keys to select high (two ear symbols) or low (one ear symbol)
sensitivity.
Press the S key to store the setting. Low sensitivity is recommended to
avoid interference from traffic (time-limited interference from another baby
monitor).
7. When the baby unit is out of r
ange, the parent unit emits an alarm.
This is due to safety considerations, because walls, particularly concrete
walls and roofs, may significantly reduce the range.
Metal plates (cars, caravans) may prevent signal reception. Placing the baby
and/or parent unit in a different location may help because radio signals are
reflected from objects or persons etc. Therefore, there will be areas where
communication is impossible even across short distances.
4
Detailed instructions
4


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SuperNova Digital Babycall at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SuperNova Digital Babycall in the language / languages: English as an attachment in your email.

The manual is 0,12 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of SuperNova Digital Babycall

SuperNova Digital Babycall User Manual - Dutch - 2 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info