573267
40
Zoom out
Zoom in
Previous page
1/44
Next page
40
OTHER FEATURES
be late to press any digit button after entering the first
digit. The limit of the delay time is 3 seconds.
Personal Preferences (PP)
All the preset values will be restored, when pressing
„PP“.
Picture Mode
If your TV has the WSS feature, the picture mode OSD
is displayed below the sound indicator, by TV Status
OSD’s. According to the WSS data, inside of the OSD
box “4:3” or “16:9” or “Auto” is written.
By pressing “ “ (TXT_UPDATE) button
(if Teletext is not active) the picture mode can be
switched into 4:3, 16:9 or Auto Mode.
Sound Indicator
This is a stereo option. The alternatives of the indicator
are Mono, Stereo, Dual I and Dual II. This indicator
is displayed under the programme number indicator
on the screen. „I-II“ button is used to select Mono or
Stereo, or Dual I or Dual II.
In Mono broadcast or in forced-mono (for stereo
broadcast).
In Stereo broadcast.
If dual broadcast detected. Dual I is selected in default
and also can be selected after Dual II by Remote Control.
If Dual II selected by Remote Control.
Sleep Timer Last Minute Indicator
It is displayed on the upper right of the screen. If sleep
timer is activated it is displayed with the TV status and
erased with it after 3 seconds.
If there is left only one minute of the down counting of
the timer, it is displayed automatically on the upper left
of the screen, and stayed there until finishing. Then TV
goes automatically to stand-by.
Mute Indicator
It is placed in the upper middle of the screen when
enabled, and it stays there until it is disabled.
To cancel mute, there is two alternative; the first one
is pressing to “ button, thus volume is set to the
preceding value, and the second one is increasing the
volume level, thus it starts at the minimum level to
increase. By decreasing the volume level in mute state,
mute will not be ignored, only the volume level will
decrease. If mute canceled after decreasing the volume
level, the volume will valid with the decreased level.
No-Signal
No-Signal Timer Indicator
It is displayed in the middle of the screen when no
valid signal detected. It shows the remained time for
the switching to the Stand-By mode (it takes 5 minutes
when any signal detected or no any Remote Control
command is accessed). The indicator is displayed in 3
seconds when there is no valid signal.
After an Remote Control command (if No-Signal Timer
is active) the timer stops and if no signal detected again
the timer is initialized to 5 minutes and starts 3 seconds
later again to count down.
It is not valid in AV mode.
Blue Background During No-Signal
In case, no valid signal is detected (in AV mode)
Blue Background is activated.During search process
Blue Background is not active. But instead of it there
is another feature given; the semi-transparent menu
background is made blue.
Volume Bar
It is displayed in the lower middle of the screen. When
a volume command is received (pressing V+ or V- by
Remote Control or Front panel) and no menu is active, it
stays on the screen for 3 seconds, after the last volume
command or until another command is received in
between.
AV Modes
By pressing the “ ” button you can switch your TV
to AV modes (except being in Teletext). Pressing this
button consecutively will switch the TV in one off the AV
modes: AV1, AV2, RGB, SVHS or FAV (Front AV). The
SVHS mode is dedicated to the AV2 mode. If there is
no AV2 mode in your TV, at the same time there is no
SVHS mode too.
AV1 supports the RGB mode and AV2 supports the
40


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Superior SP 5521 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Superior SP 5521 in the language / languages: German as an attachment in your email.

The manual is 2,58 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info