573272
32
Zoom out
Zoom in
Previous page
1/40
Next page
32
MENU SYSTEM
Band
By pressing G / H select Band.
By pressing F / E button, you can change the
channel type to C or S.
Channel
By pressing G / H select Channel.
Use F / E buttons to change the channel number.
You can also enter a number via digit buttons on the
remote control.
Standard
By pressing G / H select Standard.
Use F / E button to change the standard to B/G,
D/K, I or L/L‘.
Colour System
By pressing G / H select Colour System.
Use F / E button to change the colour system to
PAL, SECAM or AUTO.
Search
By pressing G / H select Search.
Press F / E button to start search. The search will
stop when a signal is found.
NOTE: If you press the buttons with one-step moves, a
frequency of 0.25 Mhz will be advanced. However if
you press the buttons all at once, it will advance
automatically. To stop searching at a certain time, you
may press F / E buttons.
VCR Mode
By pressing G / H select VCR mode.
Use F / E buttons to set VCR Mode on or off.
HINT: If you want to watch a DVD , then you have to
set this item as “OFF”.
Decoder
You can use this mode to connect any decoder to your
TV.
By pressing G / H select Decoder
Press the F / E buttons to turn it ON or OFF.
When you switch the Decoder setting to OFF, EXT1 output
will be muted. In this case, EXT1 output will not be avail-
able to display video. If it is switched ON, the EXT-1 out-
put will be the selected video source. Any decoder can be
connected to EXT1 to unscramble required video signal.
HINT: Decoder setting should be stored separately for
each programme.
Store
By pressing G / H button select Store.
Press E or “OK” button to store the adjustments.
“STORED” will be displayed on the screen.
A.P.S.
By pressing G / H button select A.P.S.
Press E button to enter the A.P.S. menu. A.P.S.
menu appears on the screen.
A.P.S. (Auto Programming System)
Country
Press F / E button to select your country. If you want
to exit from A.P.S. function, press the “TV” button. For
going back, press “MENU”.
When you press OK button for starting APS, all stored
programs will be erased and the following screen will
be displayed.
Whenever you press the “TV” button, A.P.S. function
stops and Channel table appears on the screen.
If you wait until the end of A.P.S., Channel table is
displayed with the programmes found and located.
Teletext Region
By pressing G / H button select Teletext Region.
32


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Superior SP 2051 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Superior SP 2051 in the language / languages: German as an attachment in your email.

The manual is 5,17 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info