643766
5
Zoom out
Zoom in
Previous page
1/20
Next page
H07023980 / DT2000532-02
English
INSTALLATION
DT2032734-0
A
B
Fig. 1
7
1
7
1
DT2032736-0
D
C
Fig. 3
4
5
Fig. 5
DT2032741-0
7
6
E
F
Fig. 4
Fig. 2
DT2012193-00
DT2032735-00
DT2032739-01
- Remove the right side panel following the
instructions given in the par. REMOVING
THE CLADDING in the instruction booklet
INSTALLATION, USE AND MAINTENANCE
accompanying the product or the cap.
INSTALLATION” in the CLADDING instruction
booklet.
- Proceed with removing the primary air shutter
[A] to be found in the pipe on the right side of
the stove, having loosened the relative fastening
screw [B]. (Fig. 1)
- Fit the Ø 40 mm union elbow [1] connected to
the flexible pipe [4], to be found in the kit, onto
the primary air inlet pipe, aligning the hole in the
elbow with the hole in the primary air inlet pipe.
Using the self-tapping screw [7] provided in
the kit, fasten the union elbow. (Fig. 2)
- Remove the rear panel [C] from the stove, having
loosened the relative screws.
Remove the knockout [D] as shown in the figure,
taking care not to scratch or dent it. (Fig. 3)
- Refit the rear panel [C].
- Insert the connector Ø 60 mm [6] of the
combustion air kit into the hole just created in the
panel [C].
Align the slots in the connector [6] with the holes
to be found in the rear panel [C] and fasten the
connector using the self-tapping screws [7]
provided in the kit. (Fig. 4)
- Connect up the connector and the union elbow
previously fastened to the stove, locking the hose
with the clip [5] provided in the kit. (Fig. 5)
- Refit the previously removed cladding in the
reverse order to removal.
- Connect the stove to any fresh air intake.
Insert the end of the connector with the
smallest diameter inside the stove [E].
Check that the hose does not come into
contact with moving parts of the stove
during operation.
5
5


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Superior Sabrina - Pellet at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Superior Sabrina - Pellet in the language / languages: English, German, Dutch, French, Italian, Portuguese, Spanish as an attachment in your email.

The manual is 3,09 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

Others manual(s) of Superior Sabrina - Pellet

Superior Sabrina - Pellet Additional guide - Dutch - 1 pages

Superior Sabrina - Pellet Usermanual and installation guide - Dutch - 52 pages


The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info