573247
10
Zoom out
Zoom in
Previous page
1/14
Next page
10
10
Never use the device on uneven surfaces and avoid tilting the device during use (e.g. on stairs).
Before cleaning, switch off and unplug the device.
Children are unaware of the dangers that arise when handling electric devices. Keep device away
from children. Be especially careful when using the device in the vicinity of children!
Keep packaging material, such as plastic bottles and expanded polystyrene pieces out of the reach
of children. Risk of choking!
Never use the device when it has been damaged, has fallen off or fails to work perfectly.
Check the device, power cord and mains plug regularly for any visual damage. If any damage has
been detected, do not use the device under any circumstances. Do not attempt to repair the device
yourself.
Repair work must only be carried out by qualified and specialized staff.
Only use the device for the intended use.
The device is only for use in private households and not designed for commercial use.
DEVICE OVERVIEW
1. Motor
2. Safety guard
3. Swing function on/off switch
4. Rotor blade
5. Speed regulator / on/off switch
6. Adjusting screw for the tilt angle
7. Coil screw with square retainer
8. Adjustment retaining screw
9. Wheel nut for coil screw
WHEN USING FOR FIRST TIME
Take all the device components out of the packaging and remove all packaging material and
enclosures.
Insert the stands into the opening on the upper curve of the metal foot then position the black
plastic balance underneath with the curved part opposite and upwards. Position the washer
downwards, again with the curved section facing upwards.
Now insert the angle coil screw from underneath into the opening of the washer and screw the
stand and foot together. Be careful when doing so to ensure the angle coil screw does not become
jammed and is securely in place.
Now loosen screws / wheels 6, 7, 8 and 9 (see device overview) of the U-attachment on the
underside of the motor.
Place the U-attachment on the stand.
CAUTION: On the stand, there are 2 bore holes situated to one side and 1 to another. The side of
the U-attachment with the square-shaped hole must be over the side of the stand which has only 1
bore hole. Be careful when doing so to ensure the bore holes of the stand are aligned with those of
the U-attachment and congruent with each other.
Firstly, place the coil screw with square retainer through the square-shaped hole of the U-
attachment. Be careful to ensure that the coil of the screw visibly protrudes from the other side of
the U-attachment when doing so.
Now screw the adjustment retaining screw above the existing coil screw into place.
Now screw wheel nuts onto the coil screws (underneath the adjustment retaining screw) and secure
them in place. This will secure the coil screw in place. CAUTION: The square retainer of the coil
screw must be completely inserted into the square-shaped hole of the U-attachment.
Now securely screw the tilt angle adjustment screw in place.
Remove the rubber protection from the motor spindle.
Unscrew the black plastic retaining ring from the motor pindle and remove the same.
Now place the rear safety guard with the grille facing up onto the motor spindle and over the
screw winding of the previously removed retainer ring.
Reposition the retainer ring onto the spindle and secure it in place.
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Superior FS-40M at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Superior FS-40M in the language / languages: German as an attachment in your email.

The manual is 0,99 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info