573277
9
Zoom out
Zoom in
Previous page
1/12
Next page
9
9
Regularly check the device, the power cord and the power plug for visible damage. Do not use the
device if you notice any damage. Do not attempt to repair the device yourself.
Repairs may only be implemented by qualified repair personell.
Use this device only on heat-resistant surfaces. Do not place the device near heat sources or open
flame.
Use this device exclusively to boil water. Do not use the device to heat any other fluids (e.g. milk)
or to heat or boil foods.
This device is intended only for private, non-commercial use.
APPLIANCE OVERVIEW
(1) Filter and spout
(2) Lid
(3) Lid release button
(4) Operating light/ On-Off switch
(5) Handle
(6) Water-level indicator
(7) Housing
(8) Base unit
(9) Power cable
HANDLING YOUR UNIT
Prior to using this device for the first time, we recommend cleaning it by boiling and discarding
water once as per the following instructions. This will remove any dust or residue remaining from
manufacture.
Place the base station on a stable, level and heat-resistant surface. Please be sure that the device
cannot slide or tip over.
Open the lid of the appliance by pressing the lid release button.
Fill the tank with clear water. The water level must be between both water level marks (min./max.)
of your unit. The device can overheat if the water level is too low. Boiling water can splash out if
the water level is too high.
Close the cover; the device will automatically switch off when the water boils only if the cover is
closed.
Place the device on the base station and connect the power plug to a power outlet.
Please be sure that the opening to pour fluids does not face toward a person as hot steam escapes
from this opening during boiling.
Switch the main switch to “1“, the control light will light up, indicating that the device is
functioning. The water will now be heated.
Please be sure that the cover is tightly closed during boiling. Danger of Burns!
After the water has come to a boil, the device will automatically switch off. The switch will jump
back to “0“, the control light will go out.
After heating the water, wait for a moment until the water no longer bubbles. Do not open the
cover during boiling or pouring.
The heating process will be shut off immediately if the device is lifted from the base station. The
device will switch off.
The water boiler is equipped with overheating protection. This will interupt the heating process of
the device if it is switched on without any water in the tank. In this case, the device must cool off for
at least 15 minutes prior to filling the tank with water and re-starting the heating process.
Pull the power plug out of the power outlet if this device is not in use.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Superior FK3-302A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Superior FK3-302A in the language / languages: German as an attachment in your email.

The manual is 0,72 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info