464692
75
Zoom out
Zoom in
Previous page
1/75
Next page
73
Problem Solution
You see an “error” display
during operation.
The key that you pressed has not been taught or input the IR
code.
Teach the key via learning procedure. (P.37)
IR Learning is not
successful.
Do not use the learn function near an incandescent lamp.
Memory capacity is full (64 keys for each device.).
Replace new batteries in the SRC-7000 and the remote you are
trying to configure.
Keep the learning distance between the remote control and
SRC-7000’s learning eye about 2~4 inches apart (5-10cm).
The learning process has no errors, but you still can’t control
your target devices:
- The battery in the target remote doesn’t have enough
power.
- Original remote might not be compatible with learning
procedure. Repeat the learning procedure again.
- If you still can’t solve the problem, contact SUNWAVE for
help.
Macro does not work.
Be sure to aim the SRC-7000 at the devices while the Macro
commands are being sent.
Macro was not properly set up. Repeat macro set-up
procedure. (P.42)
A key of your existing
remote performs two or
more functions
Some remotes issue multiple commands when a key is held
down. Please be sure to teach different keys of SRC-7000 for
these different commands.
Each key of SRC-7000 can learn 6 commands in a Cycle key.
(P.40)
The LCD screen turns off.
The SRC-7000 is preset automatically to switch the LCD off
after 1 minute by default if left unused. You can also setup the
idle time to turns off the LCD. (P.54)
You can turn on the SRC-7000 again as followed:
- Tap the touch screen
- Pick up the SRC-7000
- Press the hard key
The touch panel isn’t
sensitivity
Please re-calibrate your touch panel (P.17)
75


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sunwave SRC-7000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sunwave SRC-7000 in the language / languages: English as an attachment in your email.

The manual is 2,02 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info