Before use
Please take the unit carefully out of the box and make sure that all components are included in the package and
undamaged.
Before first use, it is recommended to operate the kettle for 2 or 3 times following the instructions above, this will
remove any dust or residues remaining from the manufacturing process.
1. Take up the jug kettle from the base before filling.
2. Open the lid by pressing the lever, then fill in the desired level of water.
Please pay attention regarding the minimum/maximum filling capacity. Close the lid by pressing it down until it
clicks into place.
3. Plug the power supply cord into the main, press the On/Off switch, the power indicator lights up.
4. When the water has boiled, the kettle will automatically switch itself off, you can stop the boiling process at any
time by lifting the On/Off switch.
Cleaning and Descaling
Cleaning
Before cleaning the water kettle, please make sure that the unit has been disconnected from the power
supply and has cooled down.
Rinse the water kettle with clear water.
Rinse the unit with clear water only briefly, especially if the device is new or has not been used for a long
period.
Do not use any aggressive detergents or abrasives.
Do not immerse the base or the water kettle in water or other liquids.
Descaling
Please use a commercially available descaling agent or vinegar to descale the appliance. Please follow
the instructions for use of the descaler. Please rinse the unit twice with clear water.
To protect the boiler from excessive calcification, please descale the appliance regularly.
EC-Declaration of Conformity
The unit complies with the essential health and safety requirements of the European Union. The EC declaration of
conformity is the basis for the CE marking of this unit.
With the publication of this manual, all previous are not valid. SUNTEC, SUNTEC Wellness, KLIMATRONIC and
the Sun logo are registered trademarks. © 2017/01 SUNTEC WELLNESS GMBH.