767512
9
Zoom out
Zoom in
Previous page
1/37
Next page
Components
1: Red indicating light 7: Lower housing
2: Green indicating light 8: Thermostat housing
3: Housing 9: Thermostat with 5 levels
4: Decorative mirror plate 10: Waffle plates with non-stick coating
5: Upper housing 11: Stainless steel waffle lifter with handles
6: Handle
Operation
Operating voltage: 220-240V~, 50-60Hz, 1200W
Please clean the waffle lifter prior to first use and follow the instructions from the segment Cleaning“.
Due to hygienic reasons the first waffle during first operation shouldn’t be consumed.
Please connect the appliance to the power outlet and turn the thermostat clockwise until the stop (white
arrow points at level 5). The red indicating light turns on and the waffle plates are heated up by the
appliance. When the waffle plates have reached the set temperature, the red indicating light will turn
off and the green indicating light turns on.
Please lift the upper housing up by using the handle and place the waffle lifter into the middle of the
waffle plate at the designated indentations.
Grease the waffle plates and the waffle lifter with some fat and put your waffle batter onto the lower
waffle plates. Make sure that you do not put too much batter onto the waffle plates to avoid an
overflowing.
Please close the appliance using the handle. The heating level at the thermostat can be adjusted
depending on your batter and desired browning level. “1” represents the lowest and 5” the highest
heating level. When the green indicating light turns on, the set temperature is reached and the waffle
plates are no longer heated. Each waffle needs about 5-6 minutes baking time which may vary
depending on the type of batter, batter amount and desired browning level.
Once the waffles are done, open the waffle maker carefully with the handle and take out the waffles
using the waffle lifter. If you do not wish to use the waffle lifter, use heat-resistant spatulas made of
plastics or wood, no cutlery made of metal, to protect the non-stick coating of the waffle plates.
After baking, turn the thermostat back to the lowest level and remove the appliance from the power
outlet.
Recipe for Belgian waffles
Ingredients for about 15 waffles:
500g flour
300g soft butter
3 eggs
1 pinch of salt
2 sachets of vanilla sugar
1 cube of fresh yeast or 2 sachets of dry yeast
½ cup of water
½ cup of lukewarm milk
325g nib sugar
Preparation:
Mix flour, salt and vanilla sugar in a big bowl. Crumble up the yeast and dissolve it in the lukewarm milk.
Add butter, milk with yeast, water and eggs to the flour and mix everything with a hand mixer until the
batter is smooth and free of lumps. Cover the batter and let it sit for at least half an hour at a warm place.
Mix nib sugar into the batter and bake the batter in the waffle maker until golden brown. Serve the
finished waffles to your liking with cream, ice-cream or fruit.
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Suntec WAE-8335 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Suntec WAE-8335 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0,78 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info