Manual Suntec SPI-8380 (page 10 of 38) (English, German, French, Italian, Spanish)

767522

Zoom out

Zoom in

1/38

Operation

• Operating voltage: 220-240V~, 50/60 Hz, 100W

• Please remove all packaging material and clean the pusher, filler pipe, blade holder, all blades and the

container prior to first use. Please follow the instructions from the segment “Cleaning”.

• Please make sure that the appliance is turned off at the on-/off-button. The appliance should be

disconnected from the power outlet before assembling the spiral cutter.

• Choose a blade of your liking and insert it into the blade holder (see picture 1). While doing so, only

touch the plastic part, never the blade itself. Blade and blade holder should form a cone together after

locking them in place.

• Place the blade holder into the appliance at the motor base (see picture 2) and turn the blade holder

anti-clockwise until the stop (“CLOSE”). The blade holder is positions correctly when the blade holder

cannot be pulled up anymore.

• To attach the filler pipe to the appliance, put the filler pipe on top of the blade holder with the pipe side

upwards. Turn the filler pipe clockwise until the stop.

• After assembling you can connect the appliance to the power outlet.

• Solid and long vegetables, e.g. carrots and zucchinis, with a diameter between 3 and 6 cm are most

suitable for the spiral cutter. Please cut one end and insert the cut end into the filler pipe. You can fix the

vegetable with the pusher to avoid turning during the cutting process.

• Please press the on-/off-button and press the pusher downwards with equal pressure until the vegetable

is cut completely (see picture 3). If you wish to have shorter noodles, take breaks of about 5 seconds

when you press down the pusher. During these breaks without any pressure, the vegetable will not touch

the blades and the noodles will be cut. The appliance should be turned off after an operation of 2 minutes

to avoid overheating of the motor. The appliance can be used again when it has cooled down.

• To turn the appliance off, press the on-/off-buttom. If you wish to change the blades, remove the

appliance from the power outlet. Please turn the filler pipe anti-clockwise and pull it up. Next, turn the

blade holder clockwise and remove it. Please press on the marked spots of the blade holder, as seen

in picture 4, and push the blade upwards while pressing.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Suntec SPI-8380 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 1,02 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Suntec SPI-8380 Manual

Product: