Components
1. Container 5. Indicating light 9. Safety switch
2. Container lid 6. Number of cups setting 10. Grinding level setting
3. Safety switch 7. Coffee bean hopper with lid 11. Non-slip feet
4. On/Off button 8. Safety cover for flat burr grinder
Operation
• Operating voltage: 220-240V~, 50/60Hz, 200W
• Please remove all packaging materials and clean the unit and its components in accordance with the
section "Cleaning". Please dry all parts before inserting them into the unit.
• Place the hopper on the unit and turn it counter-clockwise until it locks into place. Please fill in the coffee
beans and close the lid. The maximum capacity of the hopper is 200g. Please do not overfill the hopper.
• Insert the container and its lid by pushing them into the unit until the stop. The maximum capacity of the
container is 95g. Please do not overfill the container.
• The unit has two safety switches and only turns on when the container and hopper are both firmly
attached.
• Please connect the unit to the power supply.
• Use the knob on the top to set the number of cups between 2 and 14 so the unit grinds the appropriate
amount of coffee powder.
• By using the knob on the unit’s side, you can set the grinding level from very fine for espressos to coarse
for French Press coffees.
• Once you have made your settings, press and hold the on/off button to start grinding. The indicating
light glows blue. As soon as the amount of coffee powder for your selected number of cups is reached,
the unit switches off automatically and the indicating light goes off. You can now remove your finger from
the on/off button.
• Please remove the unit from the power supply and then remove the container.
• You can now use the coffee powder for filter coffee, espresso, French Press and coffee makers.
