Manual Suntec KLIMATRONIC IMPRESS plus 2.7 (page 18 of 172) (All languages)

664802

Zoom out

Zoom in

1/172

 As soon as the water tank is full, the “WF” blinks on the display, the standby mode automatically turns

on, it will sound the warning alarm and all the buttons will be locked until the tank is emptied.

 To empty of the water tank you need to remove the rubber stopper on the bottom of the unit and let the

water leak into a container.

 Turn off the power and unplug the power cord. Once you reboot the device, it will work normally.

Cleaning

Before starting cleaning or maintenance, turn the power off by pressing the POWER button, wait a few minutes

and then unplug the power cord from the outlet.

Surface cleaning

Clean the unit using a damp cloth, and then wipe it using a dry cloth. Do not use chemical solvents (such as

gasoline, alcohol). The surface and the entire housing could be damaged.

Air filter cleaning

Clean the air filter regularly. If the air filter is clogged with dust, the efficiency of the device could be

reduced.

1) Open the air outlet and remove the filter.

2) Wash the air filter by submersion into warm water (about 40° C) with neutral detergent, rinse it under

running water and dry it with a soft cloth.

3) Install air filter carefully after cleaning and drying.

Storage

1. Pull the power plug and empty the water tank. Then set the device into the operating mode. Press the fan

button and hold it for a. 5 seconds until the device switches to low fan speed. Let the unit run in this mode for half

a day until the inner construction has dried. Thus, it will not become mouldy.

2. Turn off the unit and unplug the power cord.

3. Coil the cord and attach it to the holder.

4. Disconnect the exhaust tubing from the device and keep it safe.

5. Put the unit into a box and bring it to a dry place.

6. Remove the batteries from the remote control and keep them safe as well.

Troubleshooting

Don’t repair or disassemble the unit by yourself, unsuitable repair may make the quality-protected card in vain,

and even cause damage to the user or his/her possession.

Problems

Cause

Solution

1. The unit does not

turn on when you

press the Power

button.

Power cord is not plugged.

Insert the plug into the socket and turn on the unit.

Water full indicator lamp blinks.

Empty the water tank.

2. The unit restarts

again and again

Windows and doors are open, other

heat sources in the room (leading to

temperature variation)

Close doors and windows, remove the heat source.

Direct sunlight

Put the unit to the shade or draw the curtains.

Exhaust hose is disconnected or

blocked.

Connect or clean exhaust hose.

Air inlet is blocked by smth.

Clean the blocked place.

3. Noise

The unit does not stand on a flat

surface.

Place the unit on a hard flat surface (reduces noise).

4. Compressor does

not start

Thermal protection function is

activated.

Please turn off the device and restart it 30 minutes

later.

Spare parts and accessories supply (fast convenient supply)

You can obtain spare parts and accessories for your IMPRESS unit from your local dealer. And at our website

www.suntec-wellness.de

you will find further information on individual accessory products as well as information on obtaining our spare

parts quickly and conveniently. You will also find other information (e.g. FAQ, lists of spare parts, document

download, etc) about your MOVE unit.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Suntec KLIMATRONIC IMPRESS plus 2.7 in the language / languages: All languages as an attachment in your email.

The manual is 1,45 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Suntec KLIMATRONIC IMPRESS plus 2.7 Manual

Product: