(II) Application KLIMATRONIC HEATWAVE LCD
• Turn on the power-on switch on the panel. Then the indicator light for instant ambient temperature is
on, showing the instant temperature value. The displayed temperature ranges from -9°C to 50°C.
Meanwhile, the indicator lights for temperature and timing are on.
• Pressing on the power key (ON/OFF/Power key) Turn on the power key will start the heater. The
power indicator light will be on. Through continuous operation of the power key, select the high heat
mode ➔ low heat mode (the low heat indicator light will be on) ➔ shut-down mode (both power and
character indicator lights will be off).
• Press the mode key and the indicator will glitter. After pressing the "+" key or "-" key to select timing
range (1 to 24 hours), the indicator light enters a lasting lighting state.
• Press the mode key again, and the indicator light will glitter. Then press the "+" key or "-" key to select
temperature range (15°C —35°C). The indicator light enters a lasting lighting state.
• After power configuration, the LCD screen displays instant temperature. When the temperature rises to the
preset
value, the heater stops heating. The power indicator light is off and its character indicator light
is on.
• Press the "OFF" key, and the indicator light for ambient temperature and timing character will be on,
while other character indicator light will be off. After the heat mark glitters for several seconds, the
heater stops working.
• Module indicator light turns red.
The room temperature will automatically be kept at the set level. The appliance will turn itself on
periodically if the room temperature drops below the desired level.
The first time the appliance is used, light odours might occour, This is related to manufacturing processes
and disappears quickly!
The appliance implements a tilt safety device, If the appliance falls over inadvertently, it turns itself off
automatically. Once it is in its original position again, it will turn itself on automatically again.
• Always disconnect the appliance from the mount before cleaning it! Make sure that is has cool down
completely!
• Clean the outside of the appliance with a damp and clean cloth und dry it with a dry cloth afterwards.
• Never use aggressive cleaning agents or chemicals, only use mild detergents.
• Never disassemble the appliance for cleaning.
• Never rinse or spray the appliance with water!
• If the appliance malfunctions, check the following points first:
• Check the connection to the mains outlet and make sure that the outlet is live (e.g. plug in a lamp
and check if it lights up),
• Check if the appliance is turned on
• Check if the appliance stands on a firm surface. Uneven or tilted positions can trigger a tilt safety switch.
If that is the case, adjust the position of the appliance accordingly.
• You can claim the device within 24 months from date of purchase (receipt).
• A free replacement or repair will be excluded from prior improper product handling.
• Defects in wear parts, consumables, as well as cleaning, maintenance or replacement of said parts
are therefore with costs.
• If you want to make a complaint, please bring the entire device in its original packaging and with proof
of purchase to your dealer. For a timely and convenient service register, visit our website
www.suntec-wellness.de and learn more.
• Without a proof of purchase, generally there will be no repair or replacement.
• In the event that the complaint case is analogous to our terms of service, all defects of the device or
its accessories due to material or manufacturing defects will be eliminated by repair or, at our
discretion, replacing the unit.
• The damage of accessories does not automatically lead to a free exchange of the whole device. In
these cases, please contact your dealer. Glass breakage, or breakage of plastic parts are always to
charge.
• The dealer or repair service can perform the repair after the expiration of warranty against charge.
