767574
14
Zoom out
Zoom in
Previous page
1/95
Next page
Components
(1) Motion sensor
(2) Control keys
(3) Main switch
(4) Air outlet
(5) Feet
Before using it for the first time, please leave the device in operation at full power for about two hours, in order
to eliminate the unpleasant odor. Make sure that the room where the device is located is well ventilated during
this operation. Please do not be worry about the "clicking sounds" during operating the unit for the first time.
This is completely normal and the sounds will disappear.
Operation
Plug the power cord into an outlet that corresponds to the voltage on the rating label of the appliance.
1. I/0
Press the main switch (3) to position "I" to switch into the standby mode.
2. ON/OFF
Press the "ON / OFF" button (2) to switch into the "LO" mode. Press the "ON / OFF" button (2) again to shut
down the device. The power turns off and the ventilation will turn off 30 seconds later.
3. Mode
Please press the "MODE" button (2) to switch to "HI" mode. The second time you press it, you can switch to
"AUTO" mode. Here you can set the target temperature between 1C and 30°C using the "TEMP" key. If the
target temperature is reached, heating is interrupted and only switched on again when the room temperature
is below the set target temperature. The default setting in "AUTO" mode is 24°C.
Please press the "MODE" button (2) again to return to the "LO" mode. The corresponding mode lights up (2).
4. SENSOR
Press the "SENSOR" button to switch into the "SENSOR" mode. Press the button again to to enter the "normal"
mode. The corresponding mode lights up (2).
The unit turns off if the "SENSOR" does not recognize any motion in the area (2 m) for 2 minutes.
Once the "SENSOR" perceives a movement in the area (2 m), the unit automatically turns on with a buzzer
sound.
5. TIMER
Press the "TIMER" button to activate the timer and set the off-time. The maximum is 8 hours. Each level adds
one hour.
6. LOCK
Press the "LOCK" button for 5 seconds to lock the control panel (2). You can not change any settings now.
Press the "Lock" button again for 5 seconds to reactivate the control panel (2).
7. WINDOW SENSOR
Please press the "MODE" and "TIMER" buttons simultaneously for 3 seconds to activate the window sensor.
A flashing symbol "[ ]" appears on the display.
As soon as the device detects a temperature drop of 1C within 30 minutes, e.g. through an open window,
the heating function is interrupted. The unit automatically switches to standby mode and the symbol lights up
continuously on the display.
14


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Suntec Klimatronic Heat Screen 1800 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Suntec Klimatronic Heat Screen 1800 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1,43 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info