767561

Suntec Klimatronic Heat Ray Carbon 3000 Manual

11
Zoom out
Zoom in
Previous page
1/89
Next page
11
objects.
•Never immerse the appliance, it’s cord and plug into
water or other liquids.
Warning: In order to avoid overheating, do not
cover the heater!
Installation
1. There are 4 brackets and fasteners inside the packaging which are to be used for the installation. Furthermore, in the
canal of back side of the appliance there are 4 square fastener washers 25×25mm. Take the square washers and fasten
2 brackets to the canal on the backside of the heater using the screws.
2. Fasten the brackets at the appropriate distance of each other (45-55cm).
Two other brackets are to be fastened using the fasteners at the appropriate distance on the wall parallel to the
floor (At least 1.8 m from the floor and at least 0.5 m from the ceiling).
4. Join the brackets on the appliance with the brackets, fastened on the wall, with the help of figured screw-nuts. Install
the heater under necessary angle (in the direction to the area being heated).
Install the appliance strict in horizontal position only.
Safety Distances: Minimum distances required for safety
Minimum distances from wall corners: 40cm
Minimum distances from coverage area and other objects: 100cm
Right and wrong positions
Direct your appliance towards the most appropriate angle.
Do face the unit to the window, glasses etc. as the heater primarily heats the locations onto which its light falls. Prevent the
loss of directed heat through the windows.
Operating
Step 1: Plug the power cord into the outlet.
Step 2: Click rocker switch to ▬ position and press Open/Close once, the digital screen shows P.0 which means power on.
Step 3: Press Open/Close twice, the digital screen shows P.1 which means first power setting.
Step 4: Press Open/Close 3 times, the digital screen shows P.2 which means second power setting.
Step 5: Press Open/Close 4 times, the digital screen shows P.3 which means second power setting.
Step 6: After the function is on, 1-24 hours timing shutdown can be adjusted. The digital screen showing 01 indicates
timing one hour, 02 indicates timing two hours, etc.
Remote control
Definition of the buttons on the remote control
The functions of the appliance may be controlled via the buttons on your remote control and LCD screen. You may also
control some of the functions of your heater through the buttons on the front side of the heater.
1000W: First heating level. After turning on the appliance, you can choose low heating level.
2000W: Second heating level. After turning on the appliance, you can choose moderate heating level.
3000W: Third heating level. After turn on the appliance, you can choose high heating level.
Timer. After the function is on, 1-24 hours timing shutdown can be adjusted. The digital screen showing 01 means one hour,
02 means two hours, etc
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Suntec Klimatronic Heat Ray Carbon 3000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Suntec Klimatronic Heat Ray Carbon 3000 in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 1,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info