767650

Suntec Klimatronic Easy 2.7 Eco Manual

16
Zoom out
Zoom in
Previous page
1/158
Next page
2. MODE: Press the Mode button after starting the unit to select between cooling, dehumidifying or fan mode.
3. FAN: Press the Fan button after starting the unit and adjust the desired fan speed.
4. TEMPERATURE - / TEMPERATURE +: Switch the unit into the cooling mode and use these buttons to adjust
desired room temperature (16-31°C).
5. SLEEP MODE: Switch the unit into the cooling mode and press this button to de- or activate the sleep mode.
6. TIMER: Turn the unit on and leave it in standby mode, then press this button to set the timer. You can set the
desired on or off time using the ▲ and ▼ keys (1h-24h).
Remote control
1. Power
2. Timer
3. Mode
4. Temperature +
5. Temperature -
6. Fan
7. Sleep mode
Functions
Cooling mode
• After starting the unit it will automatically start with default settings: cooling mode, 22°C, low fan speed.
• Press the MODE button to set the cooling mode, the cooling mode indicator lights.
• Press the ▲ or ▼ to adjust to the temperature (16°C – 31°C).
• Press the FAN button to adjust the fan speed (high or low).
Fan mode
• Press MODE button to turn on the fan mode, the fan mode indicator lights.
• Press the FAN button to adjust the fan speed (high or low).
• Temperature setting and sleep mode cannot be set.
Timer
• In standby mode, press the TIMER button to set the on-time. The timer indicator lights up.
• After starting the unit press the TIMER button to set the off-time. The timer indicator goes off.
Dehumidifying mode
• Drücken Sie die Taste MODE, um den Entfeuchtungsmodus einzustellen, der Entfeuchtungsmodus-
Indikator leuchtet.
• Temperatureinstellung und Schlafmodus können nicht eingestellt werden, die Geschwindigkeit des
Ventilators bleibt automatisch niedrig.
Sleep mode
• Press the SLEEP MODE button, the fan speed will be automatically adjusted on the low level.
• If the sleep mode will be activated during operation in the cooling mode, the temperature will rise an
hour later by 1°C, two hours later by another 1°C and then remains constant.
• Sleep mode is not adjustable during dehumidifying and fan mode. If the water tank is full, the standby
mode will switch on, settings will be deleted and the sleep mode will be disable.
Compressor protection
• The compressor requires a start-up phase and will start three minutes later on after turning on / reboot
the device.
… 16 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Suntec Klimatronic Easy 2.7 Eco at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Suntec Klimatronic Easy 2.7 Eco in the language / languages: English, German, Dutch, French, Italian, Polish, Portuguese, Spanish as an attachment in your email.

The manual is 3,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info