Mounting the fan head
1. Parts identification of the fan head
1. motor
2. rear guard
3. guard lock nut
4. blade
5. blade cap
6. front guard
7. screw
2. Mounting the rear guard
Mount the rear guard on the Motor and secure it with the Guard
lock nut.
3. Mounting the blade
insert the blade onto the motor shaft. Tighten the blade with
the blade cap.
4. Mounting the front guard
Fix the front grille in place by attaching the
hook on the top of the front protective grille above the rear
protective grille. Now connect the two grilles by pressing them
together laterally so that the two protective grilles are attached
to the external plastic ring.
Close the clamp and secure it with a screw.
How to use
Speed control
The fan speed can be set as follows:
Function of the pushbuttons
To switch on the unit, simply press one of the push buttons (1-2-3). Press "0" to turn off the unit.
Oscillation
Push down the oscillation knob and the Fan will oscillate, pull up the knob, the fan will not oscillate.
Tilting adjustment
Always switch the fan off before Making a tilt adjustment, the air Flow can be adjusted upward or Downward by
simply moving the guard up or down.
Height adjustment
Loosen the height adjustment knob, then adjust the pipe to the desired. Height and the tighten the adjustment
knob
Technical information
Cleaning
• Always disconnect the appliance from the power outlet before cleaning. Never immerse the appliance
in water to prevent electric shocks.
• Wipe over the exterior of the appliance with a soft wet cloth and then wipe dry with a dry cloth.
• Please do not use any aggressive or chemical cleaning agents or abrasive cleaning agents such as
steel wool.
• If you do not use the appliance for a long period of time, please store it in a dry place protected from
dust.
In case of complaint
• You can claim the device within 24 months from date of purchase (receipt).
• A free replacement or repair will be excluded from prior improper product handling.
• Defects in wear parts, consumables, as well as cleaning, maintenance or replacement of said parts are
therefore with costs.