o You can take out the drum wheel or leave it inside when filling the container with water. Please
note that the water temperature should be below 30°C and the water level should not exceed
the max. water level mark on the container.
o When inserting the drum wheel, make sure that the gear side of the drum wheel is positioned
at the back while the flat side is positioned at the front near the water level meter. Put the air
purifier back on the water container. If the appliance is positioned in front of you, the lid should
be in a position where you are able to read the letters on the control panel.
o Please change the water regularly.
• Control panel:
A) On-/Off-button „power“:
Connect the power plug to the power outlet and press the on-/off-button to turn on the appliance.
Every pressing on the control panel is accompanied by a sound.
The indicating light M, information on the current air humidity (display B) and the auto mode (see
segment C) are displayed on the control panel. By pressing the on-/off-button a second time, the
appliance can be turned off.
B) Current air humidity display „CURRENT HUMIDITY“:
The current air humidity is displayed automatically once the appliance is turned on:
Display „LOW“: Low air humidity (below 40%)
Display „LOW“ and „MID“: Mid air humidity (between 40% and 60%)
Display „LOW“, „MID“ and „HIGH“: High air humidity (over 60%)
C) Operation level button „speed“:
Press the button „speed“ to choose from four operating levels that are displayed by the symbols O
and J on the LED display:
Low operating level „LOW“, mid operating level „MID”, high operating level „HIGH” and the
operating level „AUTO“ which adjusts the current air humidity to the ideal air humidity of 40-60%.
D) Anion button „anion“:
When activating the anion function anions will be added to the air to improve the air quality. An
active anion function is displayed by the indicating light K.
E) Sleep mode button „sleep“:
During the sleep mode all symbols are turned off on the display except from the indicating lights L
and M. The operating level is set as low.
F) Timer:
With the timer function you can choose between 1 and 8 hours. When the set time is over, the
appliance will turn off automatically.
G) Light-up button „light“:
By pressing the button „light“, additional lights will light up around the LED display. Turn it off by
pressing the button again.
H) Child safety lock:
To activate the child safety lock press and hold the buttons „timer“ and „light“ for 3 seconds. As soon
as the child safety lock is active, the indicating light N will show on the display. Pressing the other
buttons will only lead to sounds, set options cannot be changed. To deactivate the child safety lock
