767510

Suntec FMA-8663 Manual

10
Zoom out
Zoom in
Previous page
1/31
Next page
• Never use the appliance with wet hands, in the
shower, in bathtubs or near containers filled with
water or other liquids.
• Please do not use the appliance while standing, use
it while sitting.
• Never use the appliance without water.
• Please do not place the appliance in the bathtub or
shower cabin when filling in water.
Components
1. Housing 5. Massage rollers
2. Control knob 6. Infrared lamps
3. Bubble bar 7. Container for bath additives
4. Splash guard/Handle
Operation
• Operating voltage: 230V~, 50Hz, 450W
• Please remove all packaging materials first.
• Please fill the pool with water and make sure that you do not exceed or fall below the min. and max.
water quantity. You will find the corresponding markings on the inside right-hand side of the pool. If you
wish, you can also use warm water.
• Please connect the device to the power supply. Smoke or odour can develop during initial start-up.
These are due to production-related residues and are normal. Please ensure adequate ventilation.
• You can choose between the following settings on the control knob as you wish:
0. „Off“ – Turning off the appliance
1. „Vibration/Bubble” – Vibration and bubbles
2. „Heat/Infrared” – Water heating and infrared
3. „Heat/Infrared/Vibration/Bubble” – Water heating, infrared, vibration and bubbles
• With the help of the container for solid bath additives, you can add rose petals or ginger slices to your
footbath, for example. Please do not use foaming bath additives.
• To protect the motor and thus ensure its longevity, it is recommended to use settings 1 and 3
continuously for a maximum of 10 minutes each. Please then switch off the unit or change to setting 2
to cool down the motor. After 5 minutes all settings can be used again.
• Please switch off the unit and remove the power cable from the power supply. Please empty the basin
and make sure that the water does not drain off against the control knob.
… 10 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Suntec FMA-8663 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Suntec FMA-8663 in the language / languages: English, German, French, Italian, Spanish as an attachment in your email.

The manual is 0,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info