Manual Sunrise Medical Quicky Classic 160 (page 8 of 64) (English, Dutch, French, Italian, Spanish)

622355

Zoom out

Zoom in

1/64

8 CLASSIC 100, 160, 160XL

ENGLISH

Amputee Axle Bracket

With the amputee support (accessory) the wheel

base can be extended by 10,5 cm. When you have

completed the adjustment, make sure that all

screws have been properly tightened (see the page

on torque).

CAUTION:

Wheel locks must be adjusted to suit the new

position.

Seat height and seat angle adjust-

ment

Remove the nut (1) and the axle from

the castor adapter (2). To adjust the

seat height to configure the spacers (4)

according the seat height matrix.

Finally position the collar (3) to the

desired chair tilt, taking

NOTE of the notches located on the

top side (Fig. 2).

Angle setting 1 = 3° (rear of chair)

Angle setting 2 = 0°

Angle setting 3 = 6° (front of chair)

Adjust the collar in such a way that the

axle is as close to perpendicular to the

ground as possible. When finished,

make sure that all scrwes have been

correctly tightened (see the page on

torque).

Horizontal Axle Position

The axle plate can be positioned

forward for maximum maneuver-

ability or rearward for increased

stability.

CAUTION:

Wheel locks must be adjusted to

suit the new position.

The longer the wheel base, the

greater the stability of the

wheelchair. Turn the axle bracket

to the rear (1) in order to extend

the wheel base.

CAUTION:

Wheel locks must be adjusted to

suit the new position.

Options – Amputee Axle Plate

Options – Castor Plates

Height adjustable backrest

The backrest height can be adjust-

ed to 5 different positions (38–40

cm). Open and remove the bolt (1)

and move the back tube into the

desired position. Then fix the bolt

again.

Options – Backrest

Angle-Adjustable backrests

The backrest can be adjusted to 5

different positions (3° forward, 0°,

5°, 10° and 15° backwards). A nut

(1) is located on the backtube,

allowing you to set the angle.

Angle adjustment of the back post

will require adjustment of the arm-

rest „hook“ support.

CAUTION:

The screws (1) connect the

backrest directly to the frame;

always ensure they are tightened correctly.

Screws that are too loose can be easily lost. In

either case, injuries could result when using the

push handles to ascend stairs.

For your own safety, we recommend that adjust-

ments only be made by authorized dealers.

The back rest height as well as the height of the

pivot point can be adjusted.

Half folding backrest

For folding the back down slight up the

lock.

CAUTION:

Make sure that the backrest locks in cor-

rectly when it is set upright again.

Reclining back (8°-40°/50°)

By pulling the 2 levers (1) at the same time

the backrest is released and can be set to

the desired position.

Releasing the 2 levers (1) will lock

the backrest automatically in the

new position. To bring the backrest

back in the upright position, just

move it (no release necessary) to

the required position.

CAUTION:

The reclining back is only

allowed to be used in combi-

nation with rear wheel

extension.

CAUTION:

The reclining back is recommended to be used

in combination with active anti-tips (max ground

clearance 3-5 cm)

CAUTION:

The reclining back is recommended to be used

in combination with a stabilizer bar.

1009/3/ST-000690634.EMS.2/Rev.D

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sunrise Medical Quicky Classic 160 in the language / languages: English, Dutch, French, Italian, Spanish as an attachment in your email.

The manual is 1,57 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sunrise Medical Quicky Classic 160 Manual

Product: