682540
9
Zoom out
Zoom in
Previous page
1/44
Next page
9VR2 Contoller Rev.A
ENGLISH
Figure 5 Electrical adjustment options
4. Operating the electrical
adjustment options
Not every wheelchair has been equipped with
electronic adjustment options. We make a
distinction between four different adjustment
options to the seating system:
Tilt adjustments
High/low adjustments
Backrest adjustments
Legrest adjustments
To use electrical adjustment options, the VR2
Seats&Lights controller is required (maximum
of two options).
4.1 Selecting the desired adjustment option
1. Switch on the controller
2. Press on the ‘mode’ button (E in gure 4) to select the ‘adjustment options’ mode. The controller
will now be in the ‘adjustment options’ mode. It is also possible to follow the status.
The joystick is used to select and operate the electronic adjustment options.
3. Move the joystick to the left or the right to select the desired adjustment option. The selected
adjustment option will be visible on the display screen.
4. Moving the joystick forwards and/or backwards will activate the selected electronic adjustment
option (see table 6). Move the joystick forwards or backwards until the desired adjustment option
has been attained.
Move joystick backwards Move joystick forwards
Tilt adjustment The entire chair will tilt
backwards
The entire chair will tilt forwards
High/low adjustments The entire chair will be raised The entire chair will be lowered
Backrest adjustments The backrest will tilt backwards The backrest will tilt forwards
Legrest adjustments The legrest angle will increase,
the footplate will be raised
The legrest angle will decrease,
the footplate will be lowered
5. To return to the ‘drive’ mode: Press on the ‘mode’ button to select the ‘drive’ mode.
Note: If you adjust the seat height by using the high/low option or use the electrical tilt adjustment 0 -
45°, the speed will be reduced due to safety reasons.
Table 1 Electrical adjustments
9


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sunrise Medical Quickie VR2 - Controller at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sunrise Medical Quickie VR2 - Controller in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 4,28 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info