682535

Sunrise Medical Quickie Q700 Manual

18
Zoom out
Zoom in
Previous page
1/124
Next page
18
Q700 M/F/R Rev.A
ENGLISH
6.0 Baeries, charging and range
6.1 Baeries
Baeries are the power source for almost all of the modern
mobility products available today. The design of baeries used
in mobility products is signicantly dierent to the baeries
used to start a car for example. Car baeries are designed
to release a large amount of power over a short period of
me, whilst mobility baeries (commonly called deep cycle
baeries) release their power evenly, over a long period of
me. Therefore, due to the lower producon volumes and
increased technological requirements, mobility baeries are
typically more expensive.
Commonly two 12 volt baeries are used together in a
mobility product, giving a total voltage of 24 volts. The size
of the baery (e.g. its available power) is expressed in amps
per hour e.g. 70amp/hr. The higher the number, the bigger
the baery size, weight and, potenally, the greater the
distance you can travel. Sunrise Medical only t as standard
maintenance free baeries into these types of wheelchairs.
This type of baery uses a method of carrying the electrolyte
commonly referred to as ‘gel’, that is held within the baery
case. As the name implies, no maintenance is required other
than regular charging. You can safely transport this type of
baery without fear of acid spilling. Furthermore, they are
approved for transportaon on aircra, trains and ships.
CAUTION!
• Do not t car baeries to the wheelchair. Fit only deep cycle,
maintenance free mobility baeries.
• When the baeries are worn out, take them to the local
authority disposal point.
• Do not expose any part of the baery to direct heat (i.e.
naked ame, gas re).
• Be extra cauous to reduce the risk of dropping a metal tool
onto the baery. It could spark or short circuit the baery
or other electrical parts that may cause an explosion. Also
take o all personal metal eects and dangling objects when
working on the baery.
• Return the baeries back to Sunrise Medical or directly to
the baery manufacturer for recycling, when they no longer
hold charge.
• The baery terminals need to be checked regularly for
signs of corrosion. If any corrosion is apparent, then clean
the terminals completely and re-grease the terminal using
Vaseline petroleum jelly, not ordinary grease. Ensure that
the terminal nut and bolt, cable clip and exposed cable are
completely covered with jelly.
DANGER!
• Do not expose any part of the baery to direct heat (i.e.
naked ame, gas re).
• Be extra cauous to reduce the risk of dropping a metal tool
onto the baery. It could spark or short circuit the baery
or other electrical parts that may cause an explosion. Also
take o all personal metal eects and dangling objects
when working on the baery.
5.10 Seat Memory Posion (Sedeo Ergo only)
The control system on the Q700 M/F/R has 4 predened seat
memory posions. Each memory locaon has a set of factory
seat posioning presets:
1. Relax funcon.
2. Lie down funcon.
3. Seat funcon
There is a 4th Memory posion (Custom Posion) that can be
used as a customized seat posion. The Seat actuators are all
working with a feedback system to track their posions and
movements.
This is important:
a. to reach the required memory posion.
b. to prevent mechanical clashes of the seat.
c. to operate the actuators especially towards the memory
posions in an ergonomic, smooth and safe way.
Although there is one free programmable seat Memory
posion, all predened Memory posions, if not suitable
for the user, can be changed and customized to the needs
required.
The soware takes into account the range of the available
mechanical movements and also all safety aspects.
Seat funcon:
The seat funcon as described in no.3 in the text above is a
predened ‘standard’ seat posion.
It also creates the possibility to always return to this ‘standard’
seat posion when you are using other memory posions
(Relax or Lie down). This can be achieved by pulling the
joysck backwards.
… 18 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sunrise Medical Quickie Q700 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sunrise Medical Quickie Q700 in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 14,41 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info