Manual Sunrise Medical Quickie Q500 (page 28 of 120) (English, Dutch, French)

682541

Zoom out

Zoom in

1/120

Q500 M/F/R Rev.B

ENGLISH

Checking controller:

• Check the thin rubber gaiter or boot around the base of the

joysck sha for damage or spling. Check visually only, do

not handle the gaiter.

• Make sure that all components of the control system are

securely mounted. Do not over-ghten any securing screws.

Checking controls:

• Switch on the hand control – Do the lights ash? This

signies that there is a fault in the electronic system. Refer

to chapter 9 for basic troubleshoong

• Operate all of the electric opons, including lights and

indicators, (if ed), to make sure that they work correctly.

• With the seang in an elevated posion, drive the

wheelchair to make sure that the ‘creep’ mode works which

will slow the wheelchair.

• Drive the wheelchair in each of the drive proles to make

sure the wheelchair performs as it did before.

WARNING!

• If you are in any doubt about the performance

requirements of your wheelchair contact your Sunrise

Medical authorised dealer.

• Aer performing any maintenance or repairs on the

wheelchair you must make sure that it is funconing

correctly before it is used.

• A complete inspecon, safety check and service should be

made by a Sunrise Medical authorised dealer at least once

per year.

• All fasteners must be replaced like for like using the correct

length, tensile strength and materials.

• When replacing self-locking nuts, or nuts/studs secured

with a thread locking soluon, ensure that a suitable thread

locking soluon is reapplied to the fastener.

• Check all Velcro fastening straps for correct adhesion when

pressed together.

• Ensure that any contaminaon, such as u, hair,etc is

removed from the Velcro straps. Such contaminaon may

aect adhesion.

Monthly checks

Perform the monthly check roune before driving as described

below.

• All fasteners should be checked monthly for wear, such as

loose bolts or broken components.

• Check all straps monthly for fraying, ripped seams or other

indicaons of excessive wear damage. Disconnue use if

damage is found.

8.2 Tyre maintenance and pressures

8.2.1 Tyre pressure

CAUTION!

If pneumac tyres are ed to your wheelchair it is important

to regularly check the air pressure and for signs of wear.

The maximum tyre pressures are listed in Secon 8.3, if in

doubt check the markings on the side of the wheelchair tyre

for guidance.

NOTE: It is important that drive wheels are inated to equal

pressures as a pair, and likewise the rear. The inator pump

provides the safest method of inang your wheelchair tyres

and the pressure can be checked with a standard motor

vehicle pressure gauge.

DANGER!

• Do not inate beyond the maximum allowed tyre pressure.

• Always use the pump that is supplied with the chair,

8.2.2 Tyre wear

When inspecng the tyres for signs of wear, look for signicant

scu marks, cuts and a diminished tyre tread. Tyres will

need to be changed when the tread cannot be seen over the

complete surface of the tyre, (Fig.8.1).

Fig. 8.1

Ik krijg de foutmelding, accident 8, wat kan dat zijn Submitted on 18-7-2023 at 18:24
Reply Report abuse

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sunrise Medical Quickie Q500 in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 14,92 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sunrise Medical Quickie Q500 Manual

Product: