682538

Sunrise Medical Quickie - Sedeo Ergo Manual

8
Zoom out
Zoom in
Previous page
1/76
Next page
8
Sedeo Ergo Rev.1.0
ENGLISH
4.0 Seng up the seang system
The average wheelchair user does not exist. This is why Sunrise Medical
wheelchairs can be adjusted according to specic needs of the user.
In this, we make a disncon between wheelchair sengs and
wheelchair seang adjustment opons. Sengs are carried out once,
the rst me the wheelchair is going to be used. They must be executed
by qualied specialist, unless explicitly stated otherwise. Seang
adjustment opons can be carried out by the user. These adjustment
opons do not require the use of tools.
4.1 Pre-set seat width
Pre-set the armrest width:
• Loosen the two screws (5.0mm Allen key) on the traversing tube as
shown in (Fig. 4.1 - A).
• Move the armrest receiver brackets to the desired posion.
• Tighten the screws rmly prior to use.
CAUTION!
• Please check that the new arm rest posion does not interfere with
any seat posioning.
Pre-set the seat plate width
Li the seat cushion o the Velcro© strips to access the seat plates.
• Use a 5.0 mm Allen Key, (Hex Wrench).
• Adjust the seat plate width by loosening the four screws, circled in
Fig. (4.2).
• Slide the plates outwards or inwards to achieve the required seat
width.
• The seat width is indicated by the scale that runs alongside each slot
(Fig.4.2).
• Tighten the four screws securely.
Pre-set the back plate width
Li the back cushion o the Velcro© strips to access the back plate
(Fig.4.3).
• Use a 5.0 mm Allen Key, (Hex Wrench).
• Loosen all of the 12 screws located within the slots.
Dene the back plate width
• Slide the side plates in or out to the required width.
• Tighten the 8 screws securely (white marked in Fig. 4.3)
Posioning/centering the back plate width
• Slide the total to the le and the right to align with the marker pin.
• Use the measuring scale embedded on the back plates and the
marker pin for reference.
• Tighten all remaining 4 screws securely (black marked in Fig. 4.3).
• Fit a backrest cushion onto the back plate.
CAUTION!
Aer nishing seat width adjustments, make sure that the armrest can
be ipped up without colliding with the backrest. Not doing so can lead
to damaging rhe product severely.
& J3 Back, (Fig.4.3.1):
NOTE: The Jay 3 Backrest can be used in conjuncon with the Sedeo
Ergo seang system. Please refer to the J3 Back Owner’s Manual for
ng and adjustment.
Fig. 4.1
Fig. 4.2
Fig. 4.3
A
Fig. 4.3.1
… 8 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sunrise Medical Quickie - Sedeo Ergo at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sunrise Medical Quickie - Sedeo Ergo in the language / languages: English, Dutch, French as an attachment in your email.

The manual is 5,83 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info