721394

SunRed SMQ2000A Manual

4
Zoom out
Zoom in
Previous page
1/18
Next page
www.sunred.nl
SAFETY
CAUTION: Before fitting or removing the appliance, ensure that the heater's power line supplying the heater is disconnected. Check that
the power line is connected to a 30mA differential circuit breaker.
■ This appliance is designed for use in gardens ,and any room in your house, including those where there is a risk of splashing. The
installation and use of your appliance must comply with the applicable standards in your country.
■ When it is switch on, an electrical heating appliance reaches very high temperature libel to cause burns. Make sure that all other
users are aware of the risks.
■ If you have any doubts concerning installation possibilities for this heater, please consult a qualified electrician.
■ Children, the elderly and the infirm may not always be aware of the danger involved in using electrical appliances. Never allow this
appliance to be used without supervision.
■ The appliance must be positioned so that the plug is accessible.
■ If the supply cord is damaged, it must be replaced by the manufacturer or its service agent or similar qualified person in order to
avoid a hazard
■ The heater must not be located immediately below a socket-outlet
■ Do not use this heater with a programmer, timer or any other device that switches the heater on automatically, since a fire risk exists
if the heater is covered or positioned incorrectly.
■ Do not place the appliance close to curtains and other combustible materials.
HOW TO ASSEMBLE
■ Before installing your appliance, you must disconnect the electrical supply at the circuit breaker.
1 Insert the lower post assembly
(11) into the base assembly (16)
and then fix it tightly by means
of 4-M6X30 screw, and insert
the clamp (12) into the lower post
(11). (fig.1)
2 Join the Lower Post Assembly
(11) and the Middle Post (9)
together with 3-M5X6 screw
(fig.2)
3 Join the Upper Post Assembly
(7) and the Middle Post (9)
together with 3-M5X6.screw
(fig.3)
1
Clamp
4-M6 X 24 Screw
Lower Post Assembly
Base Assembly
… 4 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for SunRed SMQ2000A at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of SunRed SMQ2000A in the language / languages: English, German, Dutch, French as an attachment in your email.

The manual is 0,75 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info