Manual SunRed SFT15 Series (page 18 of 85) (All languages)

818332

Zoom out

Zoom in

1/85

ASSEMBLY

Step 12

Connect gas hose with burner.

Ensure ght posion.

Run a ghtness/leak test.

The injector aached to this unit is not intend-

ed for removal. The injector is factory assem-

bled. It is forbidden to change this device from

one gas pressure to another pressure. Do not

connect gas cylinder directly to the unit with-

out a regulator.The exible hose should be

approved according to EN16436:2014. The

regulator must comply with standard

EN16129:2013, the outlet pressure of the

regulator should correspond to the values on

the nameplate. The replaced regulator must

comply at least with the following specicaon

according to naonal regulaons.

Step 13

Insert housing door J and close the

door.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of SunRed SFT15 Series in the language / languages: All languages as an attachment in your email.

The manual is 11.5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

SunRed SFT15 Series Manual

Product: