Manual SunRed SFT15 Series (page 14 of 85) (All languages)

818332

Zoom out

Zoom in

1/85

ASSEMBLY

Step 1

Mount the wheel assembly on the

base plate. Fasten the wheel assem-

bly to the base plate using 8 M6X12

bolts BB and 8 m 6 ange nuts CC.

Insert the pins of the base into the

holes of the lower bracket and press

to secure the pins.

Use 4 M5X12 screws LL to secure

the lower support and lower frame.

Insert the pins of the control unit

into the holes of the upper bracket

and press them to secure the lower

support and lower frame. Inser the

pins of the control unit into the

holes of the upper bracket and

press them to secure the pins. Use

the 4 piece screw M5X12 screw LL

for fastening.

Fasten the magnets PP with the

screws M3x9 MM and the ange

nut M3 NN.

Step 2

Screw the side panels together with

the 18 screws M3x15 AA.

Step 3

Insert the 4 upper aluminum pro-

les into the holders provided on

the ring unit and screw them to-

gether with the M3x16 screws AA.

Unscrew the switch buon, insert a

small baery (not included), ghten

the switch buon.

NOTE

The top frame must match the boom

frame. The magnet side must be on the

same side as the grooved side.

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of SunRed SFT15 Series in the language / languages: All languages as an attachment in your email.

The manual is 11.5 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

SunRed SFT15 Series Manual

Product: