www.sunred.nl
Activation button
A. Press on the On/Off switch to activate the heater
B. Press on the button once to operate the heater on 1000W power.
C. Press on the button twice to operate the heater on high 2000W power.
D. Press on the button three times to activate the LED ambient lighting without heat.
E. Press on the button four times to activate the LED ambient lighting and to operate the heater on 2000W power.\
F. Press on the button five times to shut the light and heat off
MAINTENANCE
Unplug the unit and let it cool completely.
To keep the heater clean, the outer shell may be cleaned with a soft, damp cloth. You may use a mild detergent if necessary.
After cleaning, dry the unit with a soft cloth.
DO NOT use alcohol, gasoline, abrasive powders, furniture polish, or rough brushes to clean the heater. This may cause
damage or deterioration to the surface of the heater.
Although this heater is outdoor approved, DO NOT immerse the heater in water for your safety.
Wait until the unit is completely dry before use.
STORAGE
Ensure the unit is completely cold before storing in a cool, dry location.
To prevent dust and dirt to build-up, use the original packaging to repack the unit.
CHOKING HAZARD: Store out of reach of children and pets. Contains small parts.
DISPOSAL
DO NOT dispose of via your weekly household waste collection service. ONLY dispose of this product at your local, licensed
recycling/waste centre.
For further information on the disposal of electrical goods, please contact your local authority.
TROUBLESHOOTING
If the heater will not operate, please check the following before seeking repair of service:
Check if the power cord is plugged into an electrical outlet, if not, plug in.
Check if electricity to the main fuse is working.
Make certain the power switches are turned on. If not, choose a setting.
ENSURE YOU HAVE READ THESE INSTRUCTIONS THOROUGHLY PRIOR TO USE
