455794

Sunpak PowerZoom 4000AF Manual

6
Zoom out
Zoom in
Previous page
1/10
Next page
indicated
in
meters or feet on the flash's
LCD panel
CD
when the camera's shutter
release button
is
lightly pressed.
"S"
shutter
priority
mode
Set the camera's command dial
to
"S".
Set the required flash
X-
sync time. The
aperture will be set automatically by the
camera.
Not
e:
If a shutter speed faster than X-sync time
is selected, the camera will automatically
switch
to
a shutter speed ' of X-sync time
when the flash is ready. You can select
slower shutter speeds at any time
"T"
aperture
priority
mode
Set the
camera
's
command
dial to "'T
".
The aperture setting can be used to pre-
cisely
control
the
depth
of
field .
Small
apertures
gi
ve more depth of field, wide
aperture settings
gi
ve less depth of field.
Wider aperture settings offer the benefit
of shorter flash recycling times and
of
a
greater flash range.
When the flash is ready, the camera auto-
matically
selects
a
shutter
speed
.
The
flash range
in
meters or feet is displayed
on the LCD.
Camera
in
"M"
mode
Set the camera's
command
dial to "M".
You
will
then
have
to
set
the
shutter
speed and the aperture manually.
If
a shutter speed faster than X-sync time
sec
is
selected, the camera will automati-
cally switch to a shutter speed of
X-
sync
time sec when the flash
is
ready. You can
select slower shutter speeds at any time.
The flash range will
be
displayed
on
the
LCD panel
in
meters or
in
feet when the
camera's
shutter
release
is
lightly
pressed.
Autofocus
illuminator
(1)
When used in the dark or in low-light con-
ditions, the PZ4000AF emits an infrared
auxiliary light 1 when the camera's shutter
release
button
is
lightly
pressed.
The
camera's autofocus system uses this light
to focus correctly.
Note:
If
'UE' a
ppe
ars
on
the
flash
unit
's LCD
panel,
correct
flash
exposure
Is
not
possib
le.
An
arrow
in
the
LCD
display
indica
tes
that
the
m
axi
m
um
flash
ra
nge
(33
meters
/108 feet) has been exceeded.
Second
curtain
synchronization
The flash can be synchronized to the sec-
ond curtain by sliding the "Sync" switch 1
to
the right.
The curtain synchronization function that
you
have
selected
is
indicated
on the
LCD display.
flWjlNI.
T
TL
(M.
ZOO
M)
BO
mm
~~
1.Dm-l0
m
First curtain sync.
10
T
TL
.
'111(1
1
1.
(M.ZOOM)
BD
mm
r.1
1.D
m-
10
m
Second cu
rta
in sync.
The LCD has a backlight, which can be
turned on by pressing the "Light" button
1. The LCD backlight goes off after about
10 seconds, or when the "light" button
is
pressed again.
Note:
The following applies for all flash settings'
with autofocus cameras:
To activate the flash unit, set the power
switch to the "BA
TI"
and mode switch to
the
TIL
and wait for the flash ready indi-
cator to light up
on
the flash unit or
in
the
camera's viewfinder. When using an auto-
focus SLR camera, the main subject must
be
positioned
in
the focusing element of
the viewfinder.
Auto shut off, and so when you shut the
back light off, please press the back light
button.
TTL Mode
When the flash unit fires with full power at
TIL
mode, "Ready lamp" in the viewfind·
er will blink as Under Exposure warning .
In
that case,
either
move
closer
to the
subject or open the aperture for
longer
effective range.
• Even if the subject
is
within the effec-
tive range,
Under
Exposure
warning
11
English
may appear when the subject is dark
color and reflection rate is low.
I-
TTl
Operating Ad
jus
table Bounce
Flash Head
The SUNPAK PZ4000AF offers a unique
flash head assembly which allows you to
position the light in a
number
of
direc-
tions, even
in
TTL mode.
For more pleasing and creative lighting
effects, the
Bounce
Flash
Head
of
the
0
90
0
PZ4000AF
is
adjustable from 0
- ,
with indicated settings to determine the
exact angle of the bounce used. Noting
down a reference angle used previously,
provides
a
convenient
way to
repeat
a
lighting effect.
1.
To adjust the Bounce Flash Head to
the desired angle, grip along the sides
with thumb and forefinger and gently
rotate
forward
or
back.
DO
NOT
ATTE
M PT TO
FORCE
THE
HEAD
BEYOND
THE
SETTINGS
AVAIL-
.I\BLE AS DAMAGE TO THE FLASH
WILL OCCUR.
@:
2.
It is important to note that the effec-
tiveness of the bounce flash feature
is
dependent upon distance and the con-
dition of the reflecting surface used.
The angle of the flash must also be set
properly to achieve the best possible
lighting
effect.
Normally
,
when
the
… 6 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sunpak PowerZoom 4000AF at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sunpak PowerZoom 4000AF in the language / languages: English as an attachment in your email.

The manual is 4,35 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info