619404
21
Zoom out
Zoom in
Previous page
1/24
Next page
7
HOW TO CLEAN THE BLENDER
1. Unplug the blender from electrical outlet.
2. Wipe blender base, control panel, and cord with a damp
cloth or sponge. To remove stubborn spots, use a mild,
non-abrasive cleanser.
3. To clean jar, unscrew blade assembly and remove from jar.
4. Carefully remove gasket from outer rim of blade assembly.
5. Carefully wash blade assembly, gasket, jar and cover in
hot, soapy water. Rinse and dry thoroughly. Do not soak.
Do not wash blade assembly, gasket, plastic jar, or cover
in a dishwasher.
6. Replace gasket on blade assembly, screw into jar and
replace onto blender base.
CUSTOMER SERVICE
If you have a question about your blender, call our toll-free
customer service number. Before calling, please note the
model, type, and series numbers and fill in that information
below. These numbers can be found on the bottom of your
blender. This information will help us answer your question
much more quickly.
7
LIMPIEZA DE LA LICUADORA
1. Desenchufe la licuadora del tomacorriente.
2. Limpie la base, el panel de control y el cable de la
licuadora con un paño o esponja húmedos. Para eliminar
las manchas rebeldes, use un limpiador suave no abrasivo.
3. Para limpiar el vaso, desenrosque el conjunto de cuchillas
y retírelo del vaso.
4. Retire con cuidado la junta del borde externo del conjunto
de cuchillas.
5. Lave con cuidado el conjunto de cuchillas, la junta, el vaso
y la tapa con agua jabonosa. Enjuáguelos y séquelos bien.
No los remoje. No lave el conjunto de cuchillas, la junta,
el vaso de plástico o la tapa en el lavavajillas.
6. Vuelva a colocar la junta en el conjunto de cuchillas,
enrósquelo al vaso y vuelva a colocarlo en la base de la
licuadora.
SERVICIO AL CLIENTE
Si tiene alguna pregunta sobre su licuadora, llame a nuestro
número gratuito de servicio al cliente. Antes de llamar, por
favor anote el modelo, tipo y números de serie y llene esta
información a continuación. Estos números se encuentran
en la parte inferior de la licuadora. Esta información nos
ayudará a responder a sus preguntas mucho más rápido.
SUN400_4181_OPPBlend_EN/SP 2/20/02 10:42 AM Page 17
21


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sunbeam Speed 4181 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sunbeam Speed 4181 in the language / languages: English, Spanish as an attachment in your email.

The manual is 0,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info