654303

Sunbeam PU8000 Torino Manual

56
Zoom out
Zoom in
Previous page
1/60
Next page
14
Advanced Settings
Recalibration of the EM0800
To recalibrate for a coarser grind
6. Take note of your current grind setting
position.
7. Rotate the grind adjustment collar to
position 15 on the grind settings, see
figure 12.
8. Lift the recalibration release lever and
remove grind adjustment collar, see figure
13 and 14.
9. To make the grind coarser, reposition the
collar to setting 10 on the grind settings.
10. Re-assemble the collar by pressing down
the front and then the rear ensuring two
clicks are heard.
11. Return the grind setting back to your
original grind setting position. Your grind
will now be coarser.
12. Attach the hopper, open the hopper
closure arm and turn on the grinder.
Note: Check the new setting delivers the
required grind before use.
To recalibrate for a finer grind
Note: The grinder is factory set for fine
grinding. Only re-calibrate finer if the 0
setting does not achieve the desired grind
fineness.
6. Rotate the grind adjustment collar to
position 15 on the grind settings,
see figure 12.
7. Lift the recalibration release lever and
remove grind adjustment collar, see figure
13 and 14
8. To make the grind finer, reposition the
collar to setting 17 on the grind settings.
9. Re-assemble the collar by pressing down
the front and then the rear ensuring two
clicks are heard.
10. Attach the hopper and run the grinder to
ensure smooth operation.
Caution: Re-calibrating too fine may cause
burrs to collide resulting in a metallic
grinding noise. If this occurs turn off the
grinder and move to a coarser setting (a
setting towards 30) or re-calibrate for a
coarser grind.
11. Open hopper closure arm and adjust
grind settings to deliver required grind
size.
Note: Further tuning may be required.
Note: Recalibration will change all previous settings on the grinder
1. Close hopper closure arm.
2. Purge beans through the grinder.
3. Turn the operation dial to the ‘off’ position.
4. Disconnect the plug from the power socket.
5. Remove the bean hopper by turning anticlockwise.
… 56 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sunbeam PU8000 Torino at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sunbeam PU8000 Torino in the language / languages: English as an attachment in your email.

The manual is 2,23 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info