654301
6
Zoom out
Zoom in
Previous page
1/12
Next page
Using your Stainless Drip Filter
Before using your Stainless Drip Filter for the
first time
It is recommended that you clean your drip
filter prior to first use by the following:
1. Place the Stainless Drip Filter on a flat,
level surface.
2. Add water into the drip filter by opening
the water tank lid and filling to the
maximum capacity (12 cup) mark.
3. Ensure the filter basket holder and
removable mesh filter basket are firmly
positioned into place and close the water
tank lid.
4. Place the empty carafe into position on the
keep warm plate and connect the plug into
a 230/240 Volt AC power outlet. The LCD
will illuminate and display ’12.00’.
5. Press the ON/AUTO/OFF button once. Water
will start to drip through into the carafe.
6. Once all the water has dripped through
and the water tank is empty, press the ON/
AUTO/OFF button twice. This will turn the
appliance off.
7. Wash the carafe, filter basket holder,
removable mesh filter basket and supplied
coffee spoon in warm, soapy water and
rinse and dry thoroughly and position back
into place in the appliance.
Your Stainless Drip Filter is now ready to use.
Setting the current time of day on the LCD
Important: The clock only needs to be set
if you are using your Stainless Drip Filter
in ‘AUTO’ mode. You do not need to set
the clock for the manual operation of your
Stainless Drip Filter.
1. Place the Stainless Drip Filter on a flat,
level surface.
2. Connect the plug into a 230/240 Volt AC
power outlet. The LCD will illuminate and
display ’12.00’.
3. Press the PROGRAM button once. The
screen will display ‘SET CLOCK’.
4. Press the HOUR button until the correct
number of hours is displayed. You can
hold the button down to scroll through the
numbers quickly.
5. Then press the MIN button until the correct
number of minutes is displayed. You can
hold the button down to scroll through the
numbers quickly.
Note: The time is displayed based on
24-HOUR digits.
6. Once you have set the desired time, either
press the PROGRAM button twice to set, or
wait 10 seconds until the MIN button stops
illuminating.
5
6


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sunbeam PC7900 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sunbeam PC7900 in the language / languages: English as an attachment in your email.

The manual is 0,73 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info