654245
7
Zoom out
Zoom in
Previous page
1/24
Next page
5
Important: Always ensure your blender is
unplugged from the power outlet before
fitting or removing the blade assembly.
Always handle the blade assembly with
caution, as the blades are extremely sharp.
Before using your MultiBlender™ Pro or
MultiBlender™ Platinum, we recommend
removing the six-blade system for thorough
cleaning.
To remove the six blade system in the glass jug
Unscrew the blade system from the jug, using
the inner measuring cup from the lid and
turning anti-clockwise (refer Fig. 1). Remove
the silicone rubber seal from the blade
assembly. Wash the lid, jug, silicone rubber
seal and the blade assembly in warm soapy
water.
Note: When removing the blade assembly
from the jug you may need to slightly tilt the
blade so that it slides out easily.
To re-assemble the six-blade system in the glass
jug (refer Fig.2)
1. Place the silicone rubber seal
1
2
3
over the
blade assembly, as shown opposite.
2. Position the blade assembly into the
base of the blender jug
1
2
3
. Ensure that
the blade assembly is firmly in place by
turning it clockwise as indicated by the
arrow.
Note: Do not remove the stainless steel blades
from the blade assembly.
Note: The blender jug will leak if the
six-blade
system is not assembled correctly.
Before using your MultiBlender
Pro
& MultiBlender
Platinum
1
2
3
Figure 2
1
2
3
Figure 1
7


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sunbeam PB7620 MultiBlender Pro at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sunbeam PB7620 MultiBlender Pro in the language / languages: English as an attachment in your email.

The manual is 1,13 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info