654217
12
Zoom out
Zoom in
Previous page
1/52
Next page
10
Using your Café Series
®
Planetary Mixmaster
®
Power Drive
Bench Mixer continued
Count-down timer
The count-down timer is especially useful
when following a recipe that specifies mixing
times.
The ‘+’ and ‘-’ buttons allow you to choose
the desired mixing duration. Press the
‘+’ button and you will add 30 seconds.
Press the ‘-’ button and you will reduce the
previously set mixing time by 30 seconds.
For example, if a recipe calls to “beat for
2 minutes”, you can set the count-down
timer to 2 minutes. Simply press the ‘+’
button until “02:00” is displayed on the LCD
screen, i.e. press the ‘+’ button four times.
If you would like to change the countdown
time after your initial setup, press the
button, then press the ‘+’ and ‘-’ buttons to
increase or reduce the mixing time to the
nearest 30 sec increment.
For example, you set the count-down timer
to 3 minutes and turn the speed control dial
to start mixing on a chosen speed. After 1
minute, 25 seconds, you pause the mixer by
pressing the
button. The LCD displays
the remaining count-down time of 01:35. If
you now press the ‘+’ button once to increase
the mixing time, the display will show 02:00
(which is the nearest 30 sec increment).
To reset the timer to “00:00”, turn the speed
control dial anti-clockwise to the “0” location
or, when paused, press the ‘+’ and ‘-’ buttons
simultaneously.
When the chosen mixing time is completed,
the mixer will beep twice to inform you that
the time has expired. It will stop mixing
automatically. The timer display “00:00”
and the LCD screen will flash for about 5
seconds. The LCD screen will display the
speed setting that it stopped at and this
setting will continue to flash.
If you need to resume mixing, simply press
the
button or, alternatively, reset the
mixer by turning the dial to “0”, and then
turn the dial clockwise.
Kitchen Timer function
The timer function can be used without
mixing as a kitchen timer or stopwatch.
Timer: Set the time as described in the
Count-down timer section on page 9, then
press the
button while the dial is in “0”
(i.e. no speed selected).
When the set time expires, the mixer
will beep and the LCD screen will flash
continuously until the
button is pressed.
Stopwatch: Simply press the
button
whilst in “0” (i.e. no speed selected). The
maximum time the LCD screen can display
is 90 minutes and will be displayed on the
LCD screen as “90:00” (ninety minutes, zero
seconds).
When the maximum time has been reached,
the mixer will beep and the time display on
the LCD screen will flash continuously until
the
button is pressed.
To reset the timer to zero (“00:00”), press
the
button, then press the ‘+’ and ‘-’
buttons simultaneously.
12


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sunbeam MX9500 Planetary Mixmaster at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sunbeam MX9500 Planetary Mixmaster in the language / languages: English as an attachment in your email.

The manual is 2,33 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info