654206

Sunbeam MX9200 Planetary Mixmaster Manual

11
Zoom out
Zoom in
Previous page
1/40
Next page
9
Count-up timer
The count up timer informs you how long
your ingredients have been mixing for. The
next time you mix the same ingredients you
can then set the count-down timer for the
specific time.
As soon as you start mixing, the timer will
automatically start to count up.
The maximum mixing time is 20 minutes
and will be displayed on the LCD screen as
“20:00” (twenty minutes, zero seconds).
The mixer will automatically stop mixing after
20 minutes and beep twice.
The screen will flash for about 5 seconds.
The timer will automatically re-set to
“00:00”.
The LCD screen will display the speed
setting that it stopped at and this setting will
continue to flash.
If you pause the mixer at any time during the
mixing process by pressing the
button
at the front of the speed control dial, the
mixing time displayed on the LCD screen will
flash until you resume mixing by pressing the
button again.
To reset the timer to “00:00”, turn the speed
control dial anti-clockwise to the “0” location
or, when paused, press the ‘+’ and ‘-’ buttons
simultaneously.
Count-down timer
The count-down timer is especially useful
when following a recipe that specifies mixing
times.
The ‘+’ and ‘-’ buttons allow you to choose
the desired mixing duration. Press the
‘+’ button and you will add 30 seconds.
Press the ‘-’ button and you will reduce the
previously set mixing time by 30 seconds.
For example, if a recipe calls to “beat for
2 minutes”, you can set the count-down
timer to 2 minutes. Simply press the ‘+’
button until “02:00” is displayed on the LCD
screen, i.e. press the ‘+’ button four times.
If you would like to change the countdown
time after your initial setup, press the
button, then press the ‘+’ and ‘-’ buttons to
increase or reduce the mixing time to the
nearest 30 sec increment.
For example, you set the count-down timer
to 3 minutes and turn the speed control dial
to start mixing on a chosen speed. After 1
minute, 25 seconds, you pause the mixer by
pressing the
button. The LCD displays
the remaining count-down time of 01:35. If
you now press the ‘+’ button once to increase
the mixing time, the display will show 02:00
(which is the nearest 30 sec increment).
To reset the timer to “00:00”, turn the speed
control dial anti-clockwise to the “0” location
or, when paused, press the ‘+’ and ‘-’ buttons
simultaneously.
When the chosen mixing time is completed,
the mixer will beep twice to inform you that
the time has expired. It will stop mixing
automatically. The timer display “00:00”
and the LCD screen will flash for about 5
seconds. The LCD screen will display the
speed setting that it stopped at and this
setting will continue to flash.
Using your Café Series
®
Planetary Mixmaster
®
Bench Mixer
continued
… 11 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sunbeam MX9200 Planetary Mixmaster at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sunbeam MX9200 Planetary Mixmaster in the language / languages: English as an attachment in your email.

The manual is 2,82 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info