Manual Sunbeam LC6000 (page 14 of 36) (English)

654442

Zoom out

Zoom in

1/36

Heading

Chopping

For the best, most consistent results, you

should try to process pieces of food that are

approximately equal in size. When you break,

cut or tear food into uniform pieces before

processing, the finished results will be more

uniform.

More consistent processing results are

achieved if the processing bowl is not

overloaded.

Mincing

Pre-cut meat into cubes approximately 2cm

square.

Vegetables

When processing vegetables such as onions,

peel and quarter or cut large vegetables into

eighths.

Mixing

The quantities that can be processed within

the processing bowl will vary with the density

of the mixture.

Adding ingredients

When various recipes require dry ingredients

such as flour, add them directly into the

processing bowl before processing. There is

no need to sift ingredients when using your

MultiProcessor

™

Compact. Liquid ingredients

may be added while the processor is

operating by pouring through the feed tube in

the processor cover.

Note: When processing sauces or semi-liquid

ingredients, stop the food processor and

scrape down the bowl sides with a spatula.

Using the Feed Tube

The most important factor for successful

slicing and shredding is the way in which the

food is packed into the feed tube.

Slicing, shredding and grating

Cut all ingredients to a size that fits

comfortably into the feed tube. Pack the

feed tube and, while holding food steady

and upright with the food pusher, press

down evenly until all ingredients are sliced

or shredded. The more firmly you push,

the thicker the slices or shreds. Do not use

excessive force or you may damage the food

processor.

Note: Never use fingers to push food down

the feed tube. Always use the food pusher.

For best results when slicing

The feed tube should always be packed firmly

to allow each piece of food to support the

others. There will always be a small portion

of food left unprocessed between the food

pusher and the blade.

For best results when shredding and grating

Remember that softer foods such as cheese

(cheddar, mozzarella or swiss) should be well

chilled before processing. Harder foods such

as parmesan or Romano cheese should be at

room temperature before processing.

Note: When grating parmesan cheese do not

apply a lot of pressure to the food pusher.

Disassembly

When processing is completed, remove the

cover from the processing bowl first and

then remove the processing bowl with the

processing blade still in place.

To remove the processing bowl firstly unlock

the processing bowl cover by rotating it

in a clockwise direction until the cover is

unlocked.

Note: Always wait for the processing blade to

stop moving completely before removing the

bowl cover.

Warning: Use extreme caution, as blades are

sharp. Always handle the chopping blade by

its central plastic section.

Handy hints for using your

Food Processor

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sunbeam LC6000 in the language / languages: English as an attachment in your email.

The manual is 1,45 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sunbeam LC6000 Manual

Product: