654442
10
Zoom out
Zoom in
Previous page
1/36
Next page
10
Heading
Before using your MultiProcessor™ Compact
Wash the processing bowl, cover and all
attachments in warm water using a mild
detergent. Dry each part thoroughly before
use.
Before you assemble the food processor,
ensure that the power cord is unplugged.
Place the motor base facing you on a dry,
level surface.
Position the processing bowl on the motor
base, with the processing cover off, over
the drive shaft. The handle of the bowl
needs to be facing you. Turn the processing
bowl counter-clockwise to lock into
position.
Insert the spindle into the food processor
bowl by placing the shaft in the centre of
the bowl. Rotate until the spindle falls
into place.
Place the processing bowl cover onto the
processing bowl, by aligning the icon
marked on the handle, with the icon
(include arrow down) on the bowl cover.
Rotate the lid to lock.
Important:
If the processing bowl and
cover are not correctly assembled, the
MultiProcessor™ Compact will not operate.
Using your MultiProcessor™ Compact
Plug the power cord into a 230-240V AC
power outlet and turn power ‘ON’.
Using the control dial, select the desired
processing speed.
The pulse function remains as long as the
Pulse button is pressed down.
The two speeds on the speed dial, will
provide continuous processing until the
control dial is returned to the ‘OFF” position.
Further ingredients can also be added whilst
processing by pouring through the feed tube
once the food pusher has been removed.
After you have completed processing, turn
the control dial to the ‘OFF’ position.
Note: For maximum control when using your
food processor, load the feed tube before
turning on your food processor. Always use
the food pusher for more evenly processed
foods and never use your fingers.
Important: When mixing a heavy load i.e
1.5kg dough, do not operate the food
processor for more than 38 secs at a time.
Using your Food Processor
10


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sunbeam LC6000 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sunbeam LC6000 in the language / languages: English as an attachment in your email.

The manual is 1,45 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info