654446
8
Zoom out
Zoom in
Previous page
1/28
Next page
HeadingUsing your Gelateria
1. Position the Ice-Cream Maker on a dry,
level surface, ensuring that the ventilation
slots on either side of the appliance are not
obstructed.
2. Ensure your Ice-Cream Maker is unplugged
from the power outlet before fitting the
connecting parts.
3. Pour a solution of salt and water into
the fixed stainless steel cylinder, using 1
tablespoon (20ml) water and a teaspoon
(5g) salt.
NOTE: The salt solution is recommended in
order to facilitate the transfer of freezing
temperatures from the fixed cylinder to
the removable cylinder and guarantee the
success of the frozen dessert.
4. Insert the removable cylinder inside the
fixed stainless steel cylinder. Be sure
to position the handle of the removable
cylinder in between the locking tab to
prevent the cylinder from moving during
the churning process. See figure 1.
5. Attach the transparent lid with pouring
hole to the base of the paddle motor, using
the round cutout in the centre of both
parts to align correctly. Connect these two
parts together by rotating the plastic screw
in an anti-clockwise direction until firm.
See figure 2.
6. Insert the paddle into the opening at the
base of the paddle motor. See figure 3.
7. Position the paddle motor with paddle over
the cylinder and rotate clockwise until the
connection plug of the paddle motor locks
into the adjacent socket. See figure 4.
Figure 2
Figure 3
6
Figure 1
Locking
Tab
8


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sunbeam GL8200 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sunbeam GL8200 in the language / languages: English as an attachment in your email.

The manual is 0,95 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info