654315

Sunbeam EM6910 Manual

22
Zoom out
Zoom in
Previous page
1/44
Next page
20
Heading
Programming your espresso
machine
The Café Series
®
Espresso Machine has
programming capabilities. Based on café
settings the
single and double
espresso functions are set at 30 and 60mls.
However by following a few simple steps the
coffee maker can personalise the espresso
machine to achieve a serve of espresso to
exactly how they like it.
Programming Single Espresso
1. Prepare the filter handle. Fit the group
handle with the single filter basket (27)
and fill with finely ground coffee (28).
Using the coffee tamp supplied, tamp
the coffee grinds (29). Secure the group
handle to the group head (30)(31).
2. Place a cup under both pouring spouts.
3. To commence programming press the
‘PROGRAM’ button (32). The light above
the ‘PROGRAM’ button will show a
constant red light and the light above the
‘MANUAL’ button will go off. Additionally
the lights above the ‘POWER’,
single
and
double espresso buttons will
remain on.
4. Press the
single espresso button once
to start the espresso pour (33). The light
above the
double espresso button will
go off and only the ‘POWER’,
single
espresso and ‘PROGRAM’ lights will remain
on.
5. Allow the espresso to pour until the desired
level. Once the desired level is reached
stop the espresso pour by pressing the
single espresso button. 2 beeps will
signify that the new setting for the
single
espresso operation has been programmed
and stored into the machines memory.
6. The espresso machine will then return to
normal operation mode and is ready to
make another espresso at the push of a
button.
Programming Double Espresso
1. Prepare the group handle. Fit the group
handle with the double filter basket (27)
and fill with finely ground coffee (28).
Using the coffee tamp supplied, tamp
the coffee grinds (29). Secure the group
handle to the group head (30)(31).
2. Place two cups under each pouring spout.
3. To commence programming press the
‘PROGRAM’ button (32). The light above
the ‘PROGRAM’ button will show a
constant red light and the light above the
‘MANUAL’ button will go off. Additionally
the lights above the ‘POWER’,
single and
double espresso buttons will remain
on.
4. Press the
double espresso button once
to start the espresso pour (34). The light
above the
single espresso button will
go off and only the ‘POWER’,
double
espresso and ‘PROGRAM’ lights will remain
on.
5. Allow the espresso to pour until the desired
level. Once the desired level is reached
stop the espresso pour by pressing the
double espresso button. 2 beeps
will signify that the new setting for the
double espresso operation has been
programmed and stored into the machines
memory.
6. The espresso machine will then return to
normal operation mode and is ready to
make another espresso at the push of a
button.
Resetting the Factory Settings
To revert back to the original factory settings;
1. Insert the power cord into a 230-240V AC
power outlet and switch the power ‘ON’.
… 22 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sunbeam EM6910 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sunbeam EM6910 in the language / languages: English as an attachment in your email.

The manual is 5,93 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info