Manual Sunbeam EM0420 AutoGrinder II (page 7 of 12) (English)

654299

Zoom out

Zoom in

1/12

Before using your Sunbeam AutoGrinder

II, wipe the grinding bowl and blades

clean with a damp cloth and wash the

transparent cover in warm soapy water. Dry

thoroughly.

Note: Allow to dry completely before using.

1. Place the AutoGrinder on a dry, level

surface.

2. Remove the cover of the AutoGrinder II by

turning it to the right/unlock position, then

lift straight up.

3. Using the measurements on the cover,

fill with the desired amount of coffee

beans and pour into the grinding bowl.

Alternatively scoop the beans directly into

grinding bowl.

4. Replace and lock the cover onto the

AutoGrinder II. Align the arrow on the lid/

cover with the ‘unlock’ graphic, on the rear

of the grinder, and turn the cover to the

left/lock position.

5. Plug the power cord into a 230-240V AC

power outlet and turn the power ‘ON’.

6. Rotate the grind selector to the required

grind setting.

Set the cup selector to the number of cups

to be ground.

7. Press the ‘Grind’ button to commence

grinding and then remove finger. The

Sunbeam AutoGrinder II will stop

automatically when the selected grind

is achieved. To stop the grind cycle at

anytime, push the ‘Grind’ button. When the

‘Grind’ button is pressed again, the grinder

will start from the beginning of the timed

cycle.

Important: Do not remove the cover before

the blades have stopped moving.

Using your Sunbeam AutoGrinder II

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Sunbeam EM0420 AutoGrinder II in the language / languages: English as an attachment in your email.

The manual is 0,7 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Sunbeam EM0420 AutoGrinder II Manual

Product: