118724
79
Zoom out
Zoom in
Previous page
1/88
Next page
Chapter 10 Using LOMlite 63
Once a fan has been reported to have failed, any subsequent recovery and repeated
failure will not be reported; that is, only one event is generated for the failure of each
fan. This is to prevent the event log being rapidly filled should the fan speed fall
very close to the failure threshold.
Once the fault has been corrected, you can clear the event log using the Solaris
lomctl clearevents command. This will automatically extinguish the Fault LED
if it is lit and re-enable checking of all fans. To re-enable checking of all fans and
extinguish the Fault LED without clearing the event log, use the LOMlite console
check command or Solaris utility lomctl check.
To display the current status of the fans, use the LOMlite console environment
command or the Solaris utility lominfo fan. These display both the current fan
speeds, expressed as a percentage of expected maximum, and the state OK or FAULT.
Note that reported speeds slightly in excess of 100% should not be considered to be
a problem.
Power
The LOMlite device is powered by auxiliary power. It functions even when the rest
of the system is powered down.
Serial Connection
You access LOMlite by a terminal connected to the serial port as follows:
Connector: LOM
Rate: 9600 baud
Parity: No
Stop bits: 1
Data bits: 8
LW3User.book Page 63 Wednesday, November 10, 1999 9:00 AM
79


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sun Netra 1400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sun Netra 1400 in the language / languages: English as an attachment in your email.

The manual is 2,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info