118724
34
Zoom out
Zoom in
Previous page
1/88
Next page
18 Netra t 1400/1405 Installation and User’s Guide September 1999
4. Feed the stripped end of each wire into the appropriate hole in the DC input
connector.
FIGURE 3-7 shows which wires should be inserted into each hole in the DC input
connector.
FIGURE 3-7 Assembling the DC Input Power Cable
5. Repeat Step 3 and Step 4 for the other two wires to complete the assembly of the
DC input power cable.
6. If you are not using the optional strain relief housing, secure the wires together
with a wire tie.
7. Repeat Step 2 through Step 6 to wire the other five DC input power connectors.
Note that you will require a separate DC power source for each DC input.
If you need to remove a wire from the DC input connector, insert the cage clamp
operating lever or a small screwdriver into the slot directly above the wire to free the
wire from the cage clamp, and press down (
FIGURE 3-6).
To Install the Optional Strain Relief Housings
1. Take the DC input connector and insert the bottom portion of the strain relief
housing into the notch on the DC input connector until it snaps into place.
Make sure the strain relief housing snaps into place on the DC input connector; you
will not be able to complete the assembly correctly if the strain relief housing is not
snapped into place.
Top of connector
from -48VDC / -60VDC Return
from ground
from -48VDC / -60VDC Supply
123
LW3User.book Page 18 Wednesday, November 10, 1999 9:00 AM
34


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sun Netra 1400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sun Netra 1400 in the language / languages: English as an attachment in your email.

The manual is 2,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info