118724
29
Zoom out
Zoom in
Previous page
1/88
Next page
Chapter 3 Installing the Electrical Supply 13
Overcurrent Protection Requirements
Overcurrent protection devices must be provided as part of each host equipment
rack.
Two 15A single-pole, fast trip, DC-rated circuit breakers (one per ungrounded
supply conductor) must be located in the negative supply conductor between the
DC power source and the Netra t 1400 system.
Circuit breakers must not trip when presented with inrush current of 20A lasting
250ms.
Note – Overcurrent devices must meet applicable national and local electrical safety
codes and be approved for the intended application.
Connection Materials
Grounding
One Thomas & Betts two-hole lug (part number: 54204-UB) suitable for 8AWG
conductor or UL/CSA approved equivalent having 5/8-inch pitch. Torque value:
3.5Nm maximum. Two M5 studs and cupwasher nuts are supplied on the rear of
the chassis for connection.
A Thomas & Betts crimping tool (part number: TBM 5-S), or approved equivalent
is required to secure the lug on to the cable.
An earthing bus bar that is near the equipment and easily accessible.
Caution External filtering and/or surge suppression devices may be required on
the power feeds where branch circuit electromagnetic characteristics are unknown.
DC Supply and Ground Conductor
The requirements are:
Suitable conductor material: tinned copper only
Conductors: 12 AWG maximum (between the Netra t 1400 and circuit breaker).
There are three conductors:
-48VDC/-60VDC Supply (pin 1)
Ground connection to power supply (pin 2)
-48VDC/-60VDC Return (pin 3)
!
LW3User.book Page 13 Wednesday, November 10, 1999 9:00 AM
29


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Sun Netra 1400 at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Sun Netra 1400 in the language / languages: English as an attachment in your email.

The manual is 2,38 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info