501843
76
Zoom out
Zoom in
Previous page
1/81
Next page
SummaSign Pro SL T-series Cutters User’s Manual
Interface 4-2
2. The default settings of the cutter are as follow:
Baudrate : 9600 (see 2.3.8.)
Data Bits : 8
Parity : None (see 2.3.9.)
Stop Bits : 2
Flow Control : Hardware
4.2.2 SERIAL INTERFACE CONNECTOR ON THE CUTTER
RS-232C Serial Interface Connector
Pin n° Signal Description
1 NC Not Connected
2RXDReceive Data
3TXDTransmit Data
4 DTR Data Terminal Ready
5 GND Signal ground
6 NC Not connected
7 RTS Request To Send
8 CTS Clear To Send
9 NC Not Connected
4.2.3 AVAILABLE SERIAL SIGNALS
If you are making your own cable, only a few of the cutter’s pins will actually
need to be connected to the host computer. To ensure optimal results, the
cable length should not exceed 4.8 m (16 feet). It should be taken into account
that your computer or cutting software may also require additional loopback
connections at the host computer's end of the data cable.
Connect the computer’s Transmit Data (TXD) pin to pin #2 on the cutter.
Connect the computer’s Receive Data (RXD) pin to pin #3 on the cutter.
For hardware handshaking, connect the computer’s Clear To Send (CTS)
pin to pin #4 or pin #7 on the cutter. Connect the computer’s Request To
Send (RTS) pin to pin #8 on the cutter.
Connect the computer’s ground (GND) pin to pin #5 on the cutter.
76


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Summa SummaSign Pro SL T-series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Summa SummaSign Pro SL T-series in the language / languages: English as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info