501843

Summa SummaSign Pro SL T-series Manual

52
Zoom out
Zoom in
Previous page
1/81
Next page
SummaSign Pro SL D-series Cutters User’s Manual
Operation 2-10
2.3.1 KNIFE PRESSURE
The KNIFE PRESSURE submenu is used to set or modify the cutting pressure of the
knife.
The default knife pressure value is 120 grams.
The knife pressure can be set between 0 and 400 grams.
The knife pressure value is set in 5-gram increments.
The active knife pressure value is marked with an asterisk (¾) on the LCD.
Knife pressure setup is explained in detail in section 1.6.1.
2.3.2 KNIFE OFFSET
The KNIFE OFFSET submenu is used to set or modify the distance between the tip
of the knife and the axis.
The default knife offset value is .45 mm.
The value can be set between 0 and 1 mm.
Make sure that the selected knife offset value is appropriate for the knife being
used.
Some fine-tuning may be necessary because of the knife’s mechanical
tolerances. To verify the knife offset, a test can be cut by pressing the 1 key.
If the offset value is set too low, the rectangles will not close.
If the offset value is set too high, the rectangles will be distorted.
The offset test is illustrated below.
2.3.3 POUNCING PRESSURE
The POUNCING PRESSURE submenu is used to set or modify the amount of
pressure exerted upon the pouncing tool.
The default pouncing pressure value is 120 grams.
The pouncing pressure can be set between 0 and 400 grams.
The pouncing pressure value is set in 5-gram increments.
The active pouncing pressure value is marked with an asterisk (¾) on the LCD.
Pouncing pressure setup is explained in detail in section 1.6.4.
2.3.4 VELOCITY
The VELOCITY submenu is used to set or modify the velocity of the tool.
The default velocity is 800 mm/s (20 ips).
The velocity can be set between 50 mm/s (2 ips) and 1000 mm/s (40 ips).
… 52 …


Need help? Post your question in this forum.

Forumrules


Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

For example, Anti-Semitic content, racist content, or material that could result in a violent physical act.

For example, a credit card number, a personal identification number, or an unlisted home address. Note that email addresses and full names are not considered private information.

Forumrules

To achieve meaningful questions, we apply the following rules:

Register

Register getting emails for Summa SummaSign Pro SL T-series at:


You will receive an email to register for one or both of the options.


Get your user manual by e-mail

Enter your email address to receive the manual of Summa SummaSign Pro SL T-series in the language / languages: English as an attachment in your email.

The manual is 1,06 mb in size.

 

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.



Info