Manual Subaru Legacy 2015 (page 212 of 580) (English)

624206

212

Zoom out

Zoom in

1/580

6. When the indicator light flashes slowly

and then rapidly after several seconds,

release both buttons.

7. Plug the motor of the entrance gate/

garage door opener to the outlet.

8. Test your entrance gate/garage door

opener by pressing the programmed

HomeLink

button.

! Operating the HomeLink

Wire-

less Control System

Once programmed, the HomeLink

Wire-

less Control System can be used to

remote-control the devices to which its

buttons are programmed. To activate a

device, simply press the appropriate but-

ton. The indicator light illuminates, indicat-

ing that the signal is being transmitted.

! Programming other devices

To program other devices such as door

locks, home lighting and security systems,

contact HomeLink

at www.homelink.com

or call 1-800-355-3515.

! Reprogramming a single

HomeLink

button

1. Press and hold the HomeLink

button

you wish to reprogram. DO NOT release

the button until step 4 has been com-

pleted.

2. When the HomeLink

indicator light

begins to flash slowly (after approximately

20 seconds), position the hand-held trans-

mitter of the device between 1 to 3 inches

(25 to 76 mm) away from the HomeLink

button you wish to program.

3. Press and hold the hand-held trans-

mitter button. The HomeLink

indicator

light will flash, first slowly and then rapidly.

4. When the indicator light begins to flash

rapidly, release both buttons.

The programming for the previous device

is now erased and the new device can be

operated by pressin g the HomeLink

button.

! Erasing HomeLink

button mem-

ory

NOTE

. Performi ng this procedure erases

the memory of all the preprogrammed

buttons simultaneously. The memory

of individual buttons cannot be erased.

. It is recommended that upon the

sale of the vehicle, the memory of all

programmed HomeLink

buttons be

erased for security purposes.

1) HomeLink

button 1

2) HomeLink

button 2

3) HomeLink

button 3

1. Press and hold the two outer buttons

(button 1 and button 3) until the indicator

light begins to flash (after approximately

20 seconds).

2. Release both buttons.

! In case a problem occurs

If you cannot activate a device using the

corresponding HomeLink

button after

programming, contact HomeLink

www.homelink.com or call 1-800-355-

3515 for assistance.

Instruments and controls/Mirrors

– CONTINUED –

3-65

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Subaru Legacy 2015 in the language / languages: English as an attachment in your email.

The manual is 34,76 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Subaru Legacy 2015 Manual

Product: