Manual Subaru Forester 2013 (page 102 of 436) (English)

624207

102

Zoom out

Zoom in

1/436

once and the indicator lights will start

flashing rapidly. After rapid flashing for 30

seconds (standb y time), the indicator

lights will then flash slowly (twice approxi-

mately every 2 seconds), indicating that

the system has been armed for surveil-

lance.

NOTE

. The system can be armed even if the

engine hood, the windows and/or

moonroof (if equipped) are open. Al-

ways make sure that they are fully

closed before arming the system.

. The 30-second standby time can be

eliminated if you prefer. Have it per-

formed by your SUBARU dealer.

. The system is in the standby mode

for a 30-second period after locking the

doors with the remote transmitter. The

security indicator light will flash at

short intervals during this period.

. If any of the following actions are

done during the standby period, the

system will not switch to the surveil-

lance state.

– Doors are unlock ed using the

remote transmitter.

– Any door (including the rear

gate) is opened.

– Ignition switch is turned to the

“ON” position.

& Disarming the system

Briefly press the “

” button (for less than

2 seconds) on the remote transmitter. The

driver’s door will unlock, an electronic

chirp will sound twice, the turn signal

lights will flash twice. The flashing of the

security indicator light will then change

slowly (once approximately every 3 sec-

onds from twice approximately every 2

seconds), indicating that the alarm system

has been disarmed.

NOTE

After disarming the alarm system,

briefly press the “

” button a second

time within 5 seconds to unlock all

other doors and the rear gate.

! Emergency disarming

If you cannot disarm the system using the

transmitter (i.e. the transmitter is lost,

broken or the transmitter battery is too

weak), you can disarm the system without

using the transmitter as follows.

. Turn the ignition switch from the

“LOCK” to the “ON” position with a

registered key.

& Valet mode

When you choose the valet mode, the

alarm system does not operate. In valet

mode, the remote transmitter is used only

for locking and unlocking the doors and

rear gate and panic activation.

To enter the valet mode, change the

setting of your vehicle’s alarm system for

deactivation mode. Refer to “Activating

and deactivating the alarm system” F2-

15. The security indicator light will con-

tinue to flash once every 3 seconds

indicating that the system is in the valet

mode.

To exit valet mode, change the setting of

your vehicle’s alarm system for activation

mode. Refer to “Activating and deactivat-

ing the alarm system” F2-15.

& Passive arming

When passive arming mode has been

programmed by the dealer, arming of the

system is automatically accomplished

without using the remote transmitter. Note

that in this mode, DOORS MUST BE

MANUALLY LOCKED.

! To enter the passive mode

If you wish to program the passive arming

mode, have it done by your SUBARU

dealer.

Keys and doors 2-17

– CONTINUED –

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Subaru Forester 2013 in the language / languages: English as an attachment in your email.

The manual is 16,04 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Subaru Forester 2013 Manual

Product: