Manual Subaru FORESTER 2010 (page 224 of 404) (English)

624205

224

Zoom out

Zoom in

1/404

7-12 Starting and operating

& Entering the vehicle while it

is running via remote start

1. Unlock the vehicle doors using the

keyless e ntry system. If the vehicle’s

doors are unlocked manually using the

key, the vehicle’s alarm system will trigger

and the remote engine start system will

turn off. Inserting the key into the ignition

switch and turning it to the “ON” position or

pressing the unlock button “

” on the

remote keyless entry transmitter will dis-

arm the alarm system. Refer to “Alarm

system” F2-14.

2. Enter the vehicle. Do not depress the

brake pedal.

3. Insert the key into the ignition switch

and turn to the “ON” position. If the ignition

switch is accidentally turned to the

“START” position, the system’s “starter

anti-grind” feature will prevent the starter

from re-cranking.

4. Depress the brake pedal. The remote

starter disengages, the vehicle’s power

window features are re-enabled and the

vehicle will operate normally.

& Entering the vehicle follow-

ing remote engine start shut-

down

An alarm trigger may occur if the vehicle is

opened by the remote keyless entry

transmitter within a few seconds immedi-

ately following remote engine start shut-

down.

& Pre-heating or pre-cooling

the interior of the vehicle

Before exiting the vehicle, set the tem-

perature controls to the desired setting

and operation. After the system starts the

vehicle, the heater or air-conditioning will

activate and heat or cool the interior to

your setting.

& Service mode

In service mode, the remote start function

is temporarily disabled to prevent the

system from unexpectedly starting the

engine while being serviced.

! To engage the service mode

Turn the ignition switch to the “ON”

position, depress and hold the brake

pedal, then press and release the “

”

button on the remote control transmitter

three times. The system will pause for 1

second and then flash the turn signal

lights and honk the horn three times

indicating that the system is in service

mode. When attempting to activate the

remote start system while in service

mode, the turn signal lights will flash and

the horn will honk two times and will not

start.

! To disengage the service mode

Turntheignitionswitchtothe“ON”

position, depress and hold the brake

pedal, then press and release the “

”

button on the remote control transmitter

three times. The system will pause for 1

second and flash the turn signal lights 1

time indicating that the system has exited

service mode.

NOTE

When taking your vehicle in for service,

it is recommended that you inform the

service personnel that your vehicle is

equipped with a remote control start

system.

& Remote transmitter program-

ming and programmable fea-

ture option

New transmitters can be programmed to

the engine starter system in the event that

remote transmitters are lost, stolen or

damaged. The remote engine start system

also has one programmable feature that

can be adjusted for user preference.

The remote engine starter system can be

programmed to either make an audible

horn chirp upon remote start activation or

not. Remote transmitter programming and

Report abuse

Libble takes abuse of its services very seriously. We're committed to dealing with such abuse according to the laws in your country of residence. When you submit a report, we'll investigate it and take the appropriate action. We'll get back to you only if we require additional details or have more information to share.

Product:

Forumrules

To achieve meaningful questions, we apply the following rules:

First, read the manual;
Check if your question has been asked previously;
Try to ask your question as clearly as possible;
Did you already try to solve the problem? Please mention this;
Is your problem solved by a visitor then let him/her know in this forum;
To give a response to a question or answer, do not use this form but click on the button 'reply to this question';
Your question will be posted here and emailed to our subscribers. Therefore, avoid filling in personal details.

new questions and answers
new manuals

You will receive an email to register for one or both of the options.

Get your user manual by e-mail

Enter your email address to receive the manual of Subaru FORESTER 2010 in the language / languages: English as an attachment in your email.

The manual is 7,98 mb in size.

You will receive the manual in your email within minutes. If you have not received an email, then probably have entered the wrong email address or your mailbox is too full. In addition, it may be that your ISP may have a maximum size for emails to receive.

The manual is sent by email. Check your email

If you have not received an email with the manual within fifteen minutes, it may be that you have a entered a wrong email address or that your ISP has set a maximum size to receive email that is smaller than the size of the manual.

The email address you have provided is not correct.

Please check the email address and correct it.

Your question is posted on this page

Would you like to receive an email when new answers and questions are posted? Please enter your email address.

Info

Subaru FORESTER 2010 Manual

Product: